MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
Price: $12
In this project, Fountain Waterfall has been simulated and the results have been investigated.
Price: $32
The problem numerically simulates the Pollution Spread in the Stagnant River using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 161562. We perform this simulation as unsteady (Transient). We use the VOF Multiphase model to define the phases of water and pollutant.
HVAC Modes Comparison on Corona Virus Particles
Intermediate
Price: $180
In this project, three different HVAC models were analyzed to investigate the effect of different types of ventilation inside a room, in which a corona patient breathes, on the breathing particles coming out from the patient's mouth, and how they spread inside this room.
Decomposition of MgO with Argon Gas for Magnesium Particle Production, ANSYS Fluent Training
Advanced
Price: $24
In this project, the decomposition of MgO with argon gas for magnesium particle production is simulated.
Twin Screw Pump, ANSYS Fluent CFD Simulation Training
Intermediate, Advanced
Price: $16
The problem numerically simulates the Twin Screw Pump using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1184161. We perform this simulation as unsteady (Transient). We use the Mesh Motion method to define rotational motion around pump screws.
Serrated Vs. Plain Airfoil: Darrieus VAWT
Beginner, Intermediate, Advanced
Price: $72
This project uses ANSYS Fluent to numerically simulate and compare a serrated-airfoil and a plain-airfoil turbine. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of 1,186,185. The simulation is run as unsteady (transient). The rotating motion of the turbine blades is defined using the Mesh Motion option.
Price: $160
The problem numerically simulates the Wind Farm with Series Arrangement using ANSYS Fluent software. We design the 3-D model by the SpaceClaim software. We Mesh the model by ANSYS Meshing software, and the element number equals 7588964. We use the Frame Motion model to define the rotational movement.
Turbine Hydropower in Waterline Optimization, Paper Numerical Validation by ANSYS Fluent
Intermediate, Advanced
Price: $240
In this project, we intend to simulate the lift-based in-pipe water turbine using the mesh motion method to compare and validate the results with the results in the article.
Price: $80
The problem numerically simulates heat transfer through the underfloor heating system by spiral pipe using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 2936179. We use the Ideal Gas option for the air density to consider free convection.