ANSYS Fluent Online Courses

Price: $12

This study presents a CFD analysis of a Multi-point Liquid Distributor for packed columns using ANSYS Fluent. We designed the 3-D symmetry model using the ANSYS Design Modeler We mesh the model with ANSYS Meshing software, and the element number equals 783,039. The Volume of Fluid (VOF) model was utilized to simulate the multiphase flow of water and air. A steady-state, pressure-based solver was employed for the simulation.

Price: $14

This study compares the thermal performance of open and enclosed heat sink designs using CFD simulations The open design features exposed fins, while the enclosed design has a closed-top 3-D symmetry model designed using ANSYS Design Modeler software model meshed with ANSYS Meshing software, and the element number equals 2,599,334. The discrete Ordinates (DO) radiation model was activated to simulate the impact of solar irradiation

Price: $8

This study investigates the thermal and fluid dynamics behavior of a pin-fin heat exchanger using CFD simulation. The geometry of the pin-fin heat exchanger was created using ANSYS Design Modeler. The computational domain was then discretized using ANSYS Meshing, resulting in 1,679,530 elements. The pin wall temperature was set to a constant 800 K to simulate a high-temperature heat source

Price: $429

This report presents a simulation of the motion of a javelin rocket using the dynamic mesh method The geometry of the javelin rocket is created using Spaceclaim software A high-quality mesh is generated around the rocket geometry using ANSYS Meshing(about 250,000 elements) The six DOF solver settings are specified, including the mass properties and the degrees of freedom for translation and rotation.

Price: $8

numerical simulation study of cooling clothing designed to regulate body temperature using ANSYS Fluent The geometry is designed in SpaceClaim, and the meshing is performed using Ansys Meshing. The mesh type is triangular, resulting in a mesh with approximately 5 million elements. We aim to investigates the effectiveness of incorporating Phase Change Material (PCM) into the clothing.. Two simulations were conducted: one without PCM and another with PCM incorporated into the clothing

Price: $31.50

The problem numerically simulates the Lockheed Martin F-22 Raptor using ANSYS Fluent The geometry is designed in SpaceClaim, and the meshing is performed using fluent Meshing. The mesh type is polyhedral, and the element number equals 4,989,000. We aim to Maximize the Lift-to-Drag Ratio of wings. We use the Adjoint Solver to analyze the Shape Sensitivity. The Design Optimization is performed with the Gradient-based Radial Basis Function (RBF) used to apply Mesh Morphing.

Price: $10

The problem numerically simulates the Fighter Helmet with Phase Change Material (PCM) using ANSYS Fluent The geometry is designed in SpaceClaim, and the meshing is performed using ANSYS Meshing. The mesh type is polyhedral, resulting in over 4 million elements. We aim to investigate the thermal performance and the effectiveness of incorporating Phase Change Material (PCM) for cooling.

Price: $14

This problem simulates a VA-111 Shkval rocket using ANSYS Fluent software. The geometry is designed in SpaceClaim, and the meshing is performed using Fluent Meshing; the element number equals 257,000 polyhedral cells. The simulation uses the Pressure-based and VOF Multiphase model to define a two-phase flow. The turbulence model is set to SST k-ω.

Price: $10

This problem simulates a Lockheed C-5 Galaxy using ANSYS Fluent software. The geometry is designed in SpaceClaim, and the meshing is performed using fluent Meshing with approximately 14 million cells. The simulation is carried out using the pressure-based solver. The turbulence model is set to Realizable k-ε.