Engineering Fields Online Courses

Here's every CFD online course related to Engineering Fields category.

898 Courses

Price: $42

This project uses ANSYS Fluent to numerically simulate a helical wind turbine. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of about 2,000,000. The simulation is run as unsteady (transient). The Mesh Motion model is used to define the rotational motion.

Play

Darrieus Wind Turbine

Beginner, Intermediate, Advanced

Price: $42

This project uses ANSYS Fluent to numerically simulate a Darrieus wind turbine. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of 2,289,621. The simulation is run as unsteady (transient). The Mesh Motion method is used to define a rotating zone.

Play

Price: $120

The problem numerically simulates the Sedimentation in Urban Sewer Conduits using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 14280. We use the dense discrete phase model (DDPM)to define water and sand particles.

Play

Price: $32

The problem numerically simulates Non-Premixed Combustion using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 11202. We use the Species Model to define the chemical reaction between fuel and oxidizer. We select the Non-Premixed Combustion because the fuel and oxidizer enter the chamber from separate paths.

Play

Price: $42

The problem numerically simulates the Solar Heat Exchanger using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 304200. We use Discrete Ordinates (DO) and Solar Ray Tracing to consider radiation heat transfer.

Play

Price: $48

The present problem simulates the collision of air and water flow within a separator chamber using ANSYS Fluent software.

Play

Price: $72

The problem numerically simulates the Multiphase Flow in Porous Medium using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. the mesh type is Structured, and the element number equals 572852. We perform this simulation as unsteady (Transient). We use the Eulerian Multiphase model to define a two-phases flow. We use the Porous medium in cell zone condition.

Play

Price: $36

The present problem simulates the air compression inside a Rampressor using ANSYS Fluent software.

Play

Price: $16

The problem numerically simulates Centrifugal Compressor with a diffuser using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 303600. We use the Frame Motion method to define rotational motion for the centrifugal compressor.

Play

AI Assistant

Ask me anything about MR CFD

How can I help?

Ask away, I'll point you the right way.

What I can do on this page

AI can make mistakes. Check important answers.