Eulerian Online Courses

Price: $28

The problem numerically simulates the Icing of a 3-D Airfoil Surface using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 978532. We perform this simulation as unsteady (Transient). We use the Eulerian Wall Film (EWF) model to estimate the formation of a thin film of liquid on the wall surfaces.

Price: $32

The problem numerically simulates the non-newtonian fluid flow inside Two Moving Eccentric Cylinders using ANSYS Fluent software. We design the 3-D model with the Gambit software. The mesh type is structured, and the element number equals 179,820. low-Re correction is activated to capture the flow patterns The Eulerian Model is used for simulating multiphase behavior. The fluid type is set as Non-Newtonian. The inner cylinder will start to rotate by applying the Moving Wall option.

Price: $16

The problem numerically simulates the Two-Phase Flow within a Convergent-Divergent Channel using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 175500. We use the Eulerian Multiphase model to define the two-phase flow.

Price: $36

The problem numerically simulates the Corona Virus Patient's Breathing in Clean Room using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 5666870. We use the Discrete Phase Model (DPM) to define the release of coronavirus particles. We investigate two factors to evaluate Thermal Comfort: PMV (predicted mean vote) and PPD (predicted percentage of dissatisfaction).

Price: $120

The problem numerically simulates COVID-19 Patient TRANSIENT Breathing in Operating Room using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 4354238. We perform this simulation as unsteady (Transient). We use the Species Transport Model to define oxygen, carbon dioxide, etc, for air conditioning applications. We use the Discrete Phase Model (DPM) to define particle injection from the patient's mouth. We use the UDF to define breathing flow rate.

Price: $240

The problem numerically simulates Fluidized Bed Polymerization Reactor using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 938174. We perform this simulation as unsteady (Transient). We perform the simulation according to a Reference Article and validate the results. We use the Eulerian Multi-Phase model to define the suspension of solid particles within a fluid flow like a fluidized bed.

Price: $20

The problem numerically simulates the process of water spray into a cubic space using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 25464. We perform this simulation as unsteady (Transient). We use the Discrete Phase Model (DPM) model to define a spray process.

Price: $16

The problem numerically simulates Eulerian Two-Phase Flow in a Moving Wall Cylinder using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 11880. We use the Eulerian multiphase model to define two-phase flow including water and air. We apply rotational velocity for the inner wall as Moving Wall.

Price: $220

In this product, a spray dryer is simulated by ANSYS Fluent software. The geometry of this project has been designed using Desing Modeler software The mesh was created on this geometry using ANSYS Meshing software. The element number is 84047. We have used the Species Transport Model in this simulation. The hot airflow, is responsible for evaporating the moisture in the solution.