Eulerian Online Courses

Price: $12

The problem numerically simulates CO2 plume dynamics in a seabed environment using ANSYS Fluent software. The 2-D geometry is designed in ANSYS Design Modeler and ANSYS Meshing is used to generate a structured mesh with 306,278 elements. The Eulerian multiphase model is employed to handle the interaction between different phases. Results are analyzed , including CO2 distribution, pressure fields, and velocity patterns.

Price: $64

This study simulates powder distribution in a stationary fluid after mixing using ANSYS Fluent. The geometry, representing a mixer tank with a rotating propeller, is designed in ANSYS SpaceClaim and meshed using ANSYS Meshing, resulting in about 3,000,000 cells. The simulation is conducted as a transient analysis for a limited time period. The Eulerian multiphase model is employed, with the granular option activated for the powder phase. Mesh motion is enabled to model the propeller rotation at 30 rpm.

Price: $72

The problem numerically simulates Arterial Stent using ANSYS Fluent software. We design the 3-D model by the Spaceclaim software. We Mesh the model by ANSYS Meshing software, and the element number equals 220,000 and 250,000 for the Stenosis and stented artery respectively . We use a UDF to define pulsatile blood flow. The Eulerian multiphase model was enabled to distinguish between the blood and arterial wall interfaces.

Price: $64

The problem numerically simulates a Pool Boiling unsteadily using ANSYS Fluent software. We design the model in Spaceclaim and then meshed it with ANSYS Meshing software generating 92,151 cells. The multi-phase Eulerian method is used for simulating the liquid phase of water and the vapor phase of bubbles The k-ɛ realizable model is performed to simulate turbulent behavior of the bubble.

Price: $42

This report presents a simulation of the mixing of water and iron powder in a cylindrical tank with a rotating impeller using the Eulerian multiphase method. The geometry of the mixing tank was created using ANSYS SpaceClaim software. A high-quality mesh of about 1,260,000 tetrahedron elements was generated using ANSYS Meshing software. Appropriate Eulerian interphase forces and settings were applied and the Moving Reference Frame (MRF) method was used.

Price: $320

The current CFD Analysis Validates the Paper ‘Field-Scale Numerical Investigation of Proppant Transport among Multicluster Hydraulic Fractures’ via ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and generated the mesh on this geometry using ANSYS Meshing software. The mesh type is structured. The Eulerian multiphase model is used to simulate the proppant. The Dense Discrete phase model (DDPM) is used in the simulation. The Saffman lift force, virtual mass force, and two-way turbulence coupling models are taken into account.

Price: $240

This project numerically simulates the Population Balanced Model Crystallization using ANSYS Fluent software. The 2-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 89,244. The multiphase Eulerian multiphase model simulates the mixture (water liquid, Ca, and CO3 ions) and Calcium-Carbonate. The crystallization modeling through PBM is also considered.

Price: $180

This project numerically simulates the Air Bubble PBM using ANSYS Fluent software. The 2-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 23,982. The multiphase Eulerian multiphase model simulates the two-phase flow of water and air. The population balance model also enables simulating bubble dynamics and interactions. Aggregation and Breakage kernels were activated, and the Luo model was used for both kernels. The mixture method for the turbulence interactions of the phases is activated.

Price: $160

The current CFD Analysis simulates the Color Spray Gun with Wall Film via ANSYS Fluent software. We have designed the initial geometry using ANSYS Design Modeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is tetrahedral with 560,134 cells. VOF multiphase model, along with the Discrete Phase Model, is used. The liquid wall film boundary condition is also enabled over the painted wall. The Automatic Mesh Adaptation option is used to enhance the quality of the mesh. The solution is Transient.