Eulerian Online Courses

Price: $4

Discrete Phase Model Dialog Box: interaction, particle treatment, tracking Physical Models: DEM, Breakup, Coalescence, etc Injection Dialog box: injection type, particle type, diameter distribution, etc Drag Laws: spherical, non-spherical, stokes-cunningham, etc Breakup Models: TAB, Wave DPM Boundary Conditions: Trap, reflect, wall-film, etc

Price: Free

Introduction and overview of the Discrete Phase Model (DPM) Introduction to Lagrangian Framework Reference Overview of DPM application in industries and real-world examples DPM pros & cons Particle Life Cycle Introduction to Governing & Trajectories Equations Particle Fate Introduction to Grid-independence study of a DPM case

Price: $64

The current CFD project simulates the humidification dehumidification (HDH) system which is a model of water desalination methods via ANSYS Fluent software. We have designed the geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software. The mesh type in the first simulation is Hybrid with 206,928 cells and Unstructured with 553,086 cells in the second case. The Discrete Phase Model (DPM), Species Transport Model, VOF Multiphase Model, Mass Transfer(Evaporation-Condensation), and a Porous Medium are used to analyze the project. Both Humidification and Dehumidification are simulated separately.

Price: $44

This simulation is about air gap membrane distillation (AGMD) via ANSYS Fluent software. We have designed the geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software. The mesh type is structured with 150000 cells. The VOF (volume of fluid) model has been used to define the multiphase model. mass transfer is defined based on the evaporation-condensation mechanism. porosity is defined to express the permeability of the porous medium.

Price: $66

In this project, Surface Evaporation inside the Desalination System using the multiphase VOF model have been simulated, and the results of this simulation have been investigated.

Price: $8

In this project, an abrasive fluid Jet has been simulated by ANSYS Fluent software.

Price: $150

The problem numerically simulates the Hourglass using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 244675. We perform this simulation as unsteady (Transient). We use the Discrete Concentrated Phase Method (DDPM).

Price: $36

This simulation is about reverse osmosis CFD Simulation via ANSYS Fluent software. The geometry of the project is modeled in Design Modeler software. The model meshed with ANSYS Meshing software. The model's grid is structured, and 44800 cells have been created. The Eulerian model is used to simulate fluid multiphase behavior in a transient study with porous medium.

Price: $48

In this project, a Packed Bed Reactor with Particles has been simulated, and the results of this simulation have been investigated.