Fluent Modules Online Courses
Here's every CFD online course related to Fluent Modules category.
Price: $240
This project numerically simulates the Population Balanced Model Crystallization using ANSYS Fluent software. The 2-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 89,244. The multiphase Eulerian multiphase model simulates the mixture (water liquid, Ca, and CO3 ions) and Calcium-Carbonate. The crystallization modeling through PBM is also considered.
Price: $180
This project numerically simulates the Air Bubble PBM using ANSYS Fluent software. The 2-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 23,982. The multiphase Eulerian multiphase model simulates the two-phase flow of water and air. The population balance model also enables simulating bubble dynamics and interactions. Aggregation and Breakage kernels were activated, and the Luo model was used for both kernels. The mixture method for the turbulence interactions of the phases is activated.
Price: $220
This project numerically simulates the Hydro-Abrasive Erosion in Pelton Turbine using ANSYS Fluent software. The 3-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 6,433,121. The multiphase VOF model simulates the water jet. The 2-way DPM model also enables the erosion of the solution. The rotational movement of the turbine is modeled using Mesh Motion Approach.
Price: $160
The problem numerically simulates the Water Jets Impingement using ANSYS Fluent software. The 3-D geometry is designed in Design Modeler software. We used ANSYS Meshing to generate mesh; the element number equals 72,000. The Automatic Mesh Adaptation is the mesh method for this problem. The liquid bulk in the domain is simulated using VOF model. Also, the droplets are modeled via DPM model.
Dynamic Mesh Concepts in ANSYS Fluent
Beginner, Intermediate, Advanced
Price: Free
Introduction to Dynamic Mesh Model in ANSYS Fluent software Introduction to Mesh Update Methods (Smoothing, Layering, Remeshing) Introduction to Options (In-Cylinder, Six DOF, Implicit Update, Contact Detection) Introduction to Dynamic Mesh Zones (Stationary, Rigid Body, Deforming, User-Defined, System Coupling)
Wall Wavy Motion CFD Simulation, Dynamic Mesh
Intermediate
Price: $54
The problem numerically simulates the Wall Wavy Motion using ANSYS Fluent software. We design the 2-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 146,998. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define deforming and moving zones. We use the user-defined function (UDF) to define the wavy motion.
Cylinder Piston Motion CFD Simulation, Dynamic Mesh
Intermediate
Price: $24
The problem numerically simulates the Cylinder Piston Motion using ANSYS Fluent software. We design the 2-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 16,623. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define deforming and moving zones. We use the In-Cylinder option to define the reciprocating motion of the piston inside a cylinder. We use the in-build function called full-piston to define the movement of the piston surface. We use the Profile to define the intake and exhaust valve lift.
Check Valve CFD Simulation, Dynamic Mesh
Intermediate, Advanced
Price: $24
The problem numerically simulates the Check Valve using ANSYS Fluent software. We design the 2-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 14,586. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define deforming and moving zones. We use the 6-DOF solver to define the rotational motion of the valve. We use the VOF Multiphase Model to define the air and water. We use the Execute Command to define the interruption of the input flow.
Lobe Pump CFD Simulation, ANSYS Fluent Training
Intermediate
Price: $96
The problem numerically simulates the Lobe Pump using ANSYS Fluent software. We design the 2-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 128,072. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define deforming and moving zones. We use the user-defined function (UDF) to define the rotational motion of lobes.