Fluent Modules Online Courses
Here's every CFD online course related to Fluent Modules category.
Particle Purifying in Air Intake Room, Design Improvement CFD Simulation
Intermediate, Advanced
Price: $10
The problem numerically simulates an Airflow Inside the Air Intake Room in ANSYS Fluent software. The 3D geometry of the model is created in SpaceClaim software. The model is meshed in ANSYS Meshing creating 13,103,505 and 13,867,650 elements for the first and second case respectively. The Discrete Phase Model (DPM) is used to simulate purifying process. The Realizable k-epsilon model is used to describe turbulence of the flow.
Mixing Tank Containing Iron Powder, Transient CFD Simulation by ANSYS Fluent
Intermediate, Advanced
Price: $42
This report presents a simulation of the mixing of water and iron powder in a cylindrical tank with a rotating impeller using the Eulerian multiphase method. The geometry of the mixing tank was created using ANSYS SpaceClaim software. A high-quality mesh of about 1,260,000 tetrahedron elements was generated using ANSYS Meshing software. Appropriate Eulerian interphase forces and settings were applied and the Moving Reference Frame (MRF) method was used.
Price: $20
The present problem simulates the pipeline pigging using ANSYS Fluent software. We have designed the geometry using Spaceclaim software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is unstructured with 659,988 cells. The Dynamic Mesh method is used to simulate the motion of pigging into the pipes Remeshing and Smoothing sub-models took over the deforming and regenerating of elements
Price: $569
The problem numerically simulates a Serpentine Fuel Cell using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 9,396,122. We use the Fuel Cell and Electrolysis Model to define a fuel cell. We used the PEMFC sub-model to define a proton exchange membrane fuel cell. We used the Species model to define H2, O2, and H2O.
Price: $569
The problem numerically simulates a Radial Fuel Cell using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 2,393,706. We use the Fuel Cell and Electrolysis Model to define a fuel cell. We used the PEMFC sub-model to define a proton exchange membrane fuel cell. We used the Species model to define H2, O2, and H2O.
Price: $629
The problem numerically simulates the Electrolysis using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 2,393,706. We use the Fuel Cell and Electrolysis Model and the Electrolysis sub-model. We used the Species model to define H2, O2, and H2O.
Solid Fuel Ramjet Engine, SFRJ, CFD Simulation, ANSYS Fluent
Intermediate, Advanced
Price: $80
In this project, a solid fuel ramjet (SFRJ) engine has been numerically simulated by ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 35,224. We use the Species Transport model to define the combustion process.
Price: $499
In this project, we perform the numerical simulation of a PEM Fuel Cell Stack System using ANSYS Fluent software. We designed the geometry of the model in 3D using Design Modeler software. We meshed the model using ANSYS Meshing software, and 9,946,409 cells have been generated. We used the Fuel Cell and Electrolysis model and the PEMFC submodel to define the proton-exchange membrane fuel cell. We applied the Stack Management option to define multiple fuel cell units. The Species Transport model is automatically activated because of using the fuel cell model.
DDPM, Proppant Transport among Multicluster Hydraulic Fractures, Paper Numerical Validation
Advanced
Price: $270
The current CFD Analysis Validates the Paper ‘Field-Scale Numerical Investigation of Proppant Transport among Multicluster Hydraulic Fractures’ via ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and generated the mesh on this geometry using ANSYS Meshing software. The mesh type is structured. The Eulerian multiphase model is used to simulate the proppant. The Dense Discrete phase model (DDPM) is used in the simulation. The Saffman lift force, virtual mass force, and two-way turbulence coupling models are taken into account.