Heat Transfer Online Courses

Price: $120

The project involves the numerical simulation of plasma spray coating using Ansys Fluent. Based on the paper, the study analyzes the impact and spread of Titanium Oxide on a surface. The 3D geometry is developed using the Design Modeler software. The meshing process utilizes ANSYS Meshing software, generating a structured mesh with 1,299,934 elements. The simulation utilizes a VOF multiphase model to capture the dynamics of droplet impact and spreading accurately.

Price: $20

This project explores the simulation of phase change material (PCM) melting within a 2D cavity, utilizing internal fins and nanoparticles to enhance thermal performance. The cavity, measuring 20mm in width and filled with paraffin wax, features a left wall and fin maintained at a constant temperature of 350K, while the right wall is kept at 300K, with other walls insulated. Simulations conducted over 375 seconds revealed that heat transfer occurs due to a temperature gradient, initiating phase change once the PCM reaches its melting temperature. Results indicated that 35.65% of the material was melted by the end of the simulation, providing critical insights into heat transfer efficiency and the influence of design parameters on PCM behavior in thermal systems.

Price: $100

This product numerically simulates a Ground Heat Exchanger using ANSYS Fluent software. We designed the 3-D model using the Design Modeler software. We meshed the model with ANSYS Meshing software; the element numbers are 3060397. We performed the present simulation in two cases, including cooling and heating.

Price: $96

This product presents Microchannel Heat Sink Optimization using ANSYS software. We model with the Design Modeler software; we mesh with ANSYS Meshing software. We use the Design Exploration tool to perform the optimization process. We use the Latin Hypercube Sampling Design in the Design of Experiment (DOE). We use the Genetic Aggregation and the Response Surface Methodology (RSM).

Price: $14

CFD project simulates airflow through an Air-Cooled Steam Condenser (ACSC) system using ANSYS Fluent software. geometry was modeled in ANSYS SpaceClaim and meshed using ANSYS Meshing with 5,534,281 elements. Two cases were analyzed: with and without windshields to study their effect on airflow and cooling performance. The simulation is pressure-based and uses the realizable k-epsilon turbulence model.

Price: $18

The problem numerically simulates the performance of single-phase immersion cooling using ANSYS Fluent software. We design the 3-D model by the Space claim software. We Mesh the model by ANSYS Meshing software, and the element number equals1,591,373.. We perform this simulation as unsteady (Transient). We use the VOF Multi-Phase model to define Mass Transfer in the form of Evaporation-Condensation.

Price: Free

Dive into 39 free, real-world CFD simulation projects covering heat transfer, aerodynamics, and multiphase flows using the complete Ansys pipeline—from DesignModeler and SpaceClaim geometry to Fluent setup and CFD-Post analysis. If you need a structured foundation before tackling these complex exercises, master the core workflow with our guided ANSYS Fluent beginner project training and buy for $9 to launch your applied CFD journey today!

Price: $27

The problem numerically simulates Microencapsulated PCMs in ANSYS Fluent software. The 3D geometry of the model is created in Space Claim software. The model is meshed in ANSYS Meshing creating 4,045,254 elements. We simulate the problem Transient via pressure-based solver.

Price: $28

The problem numerically simulates a printed circuit board (PCB) cooling using ANSYS Fluent software. We design the 2-D model by the Space claim software. We Mesh the model by ANSYS Meshing software, and the element number equals 19106. We perform this simulation as unsteady (Transient). We use the VOF Multi-Phase model to define Mass Transfer in the form of Evaporation-Condensation.