Design Modeler Online Courses

Price: Free

Dive into 39 free, real-world CFD simulation projects covering heat transfer, aerodynamics, and multiphase flows using the complete Ansys pipeline—from DesignModeler and SpaceClaim geometry to Fluent setup and CFD-Post analysis. If you need a structured foundation before tackling these complex exercises, master the core workflow with our guided ANSYS Fluent beginner project training and buy for $9 to launch your applied CFD journey today!

Price: $249

This product numerically simulates the Pouch Battery Discharge using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 13601. We use the MSMD (Multi-Scale Multi-Domain) Battery model to define the charge/discharge. We use the ECM (Equivalent Circuit Model) sub-model to determine the electrochemical computations. The run calculation is in an unsteady state (transient).

Price: $249

This product numerically simulates the Pouch Battery Discharge using ANSYS Fluent software. We design the 3-D model with Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh is Structured, and the element number equals 1210. We use the MSMD (Multi-Scale Multi-Domain) Battery model to define the charge/discharge. We use the NTGK sub-model to determine the electrochemical computations. The run calculation is in an unsteady state (transient).

Price: $60

this report presents a FSI analysis of a HAWT using CFD. The geometry was created using ANSYS Design Modeler, and meshing was performed with ANSYS Meshing, resulting in a high-fidelity model with 3,465,821 cells. The simulation leverages (MRF) approach for rotating domains and dynamic mesh methods to capture the complex fluid-structure interactions. A two-way FSI approach was employed to capture the mutual interaction between the fluid flow and the structural deformation of the turbine blades.

Price: Free

In this course, you will thoroughly learn how to design a 3D model. In addition, how to draw two-dimensional sketches is fully explained. Geometry drawing tools are fully introduced in Design Modeler software. At the end of the course, you will be able to model a complex three-dimensional geometry with the tools in this software. This Course is presented so that it is as practical as possible so that the graduates after the end of the Course can work well with this software to produce the geometries required for CFD works.

Price: $28

In this project, the evaporation of soil moisture in a fluidized bed was simulated using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 22,000 elements was generated using ANSYS Meshing. The Eulerian model was chosen to simulate multiphase flow, and the species transport model was used to define the mixture in each phase. Evaporation was modeled using the evaporation-condensation method based on the Lee

Price: $120

In this project, we are simulating the bubbling fluidized bed (BFB), a type of fluidized bed reactor where solid particles are suspended and agitated by the upward flow of gas The design and operation of BFBs allow for better control of temperature and reaction conditions, leading to improved efficiency and product quality in industrial processes The 2D geometry of the BFB is designed using Design Modeler software. Then, it is meshed in ANSYS Meshing. In total 26800 cells are generated. To model BFB, two Eulerian phases are defined by the Eulerian multiphase model.

Price: $24

This study uses CFD simulation to investigate the water tank filling process The geometry of the tank was created using ANSYS Design Modeler, and the computational domain was discretized using ANSYS Meshing, resulting in over 135,000 elements The Volume of Fluid (VOF) model was employed to simulate the interaction between water and air phases A User-Defined Function (UDF) was implemented to control the time step size

Price: $15

This study investigates the displacement of a net panel subjected to water flow using ANSYS Fluent simulation. The geometry of a square net panel was created using ANSYS Design Modeler. The computational domain was then discretized using ANSYS Meshing, resulting in over 2,339,853 elements. The simulation aims to analyze the net panel's fluid-structure interaction The structural model utilized a Linear Elasticity submodel to simulate the net panel’s deformation