Design Modeler Online Courses

Price: $14

This study investigates the thermal performance of an HVAC system with Phase Change Materials (PCMs) using ANSYS Fluent. The geometry, representing a U-shape pipe system with PCM-filled pipes, is designed in ANSYS SpaceClaim and meshed using ANSYS Meshing, resulting in 6,204,324 polyhedra elements. The simulation is conducted as a transient analysis over 24 hours. The RNG k-ε turbulence model is employed, and the Solidification and Melting model is activated with a Mushy Zone Parameter of 100,000. The energy equation is enabled to accurately model heat transfer.

Price: $14

This study investigates the airflow dynamics of a 2D wind turbine using CFD analysis in ANSYS Fluent. The 2D geometry was created in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a tetrahedral mesh of 60,912 elements. The simulation utilizes a dynamic mesh feature with remeshing and smoothing methods, coupled with a Six DOF (Degree of Freedom) model for turbine rotation. A transient, pressure-based solver captures time-dependent flow characteristics. The simulation examines airflow patterns, velocity distributions, and turbine performance over multiple time steps, visualized through velocity magnitude contours.

Price: $240

This study investigates bubble dynamics in a 2D boiling chamber using CFD analysis in ANSYS Fluent. The 2D geometry was created in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a structured mesh. The simulation utilizes the Volume of Fluid (VOF) multiphase model coupled with an evaporation-condensation model for phase change. A User-Defined Function (UDF) initializes a sinusoidal air layer at the chamber bottom. The transient simulation examines bubble formation, growth, rise, and detachment over multiple time steps, visualized through volume fraction contours.

Price: $56

This study investigates the flow dynamics in a steam turbine using CFD analysis in ANSYS Fluent. The 3D geometry was created in SpaceClaim and meshed using ANSYS Meshing, resulting in about 19 million tetrahedral elements. The simulation utilizes the Realizable k-ε turbulence model with standard wall function and includes the energy equation for temperature analysis. A density-based solver with real-gas-peng-robinson model is employed for compressible flow.

Price: $12

This study investigates the flow dynamics of air and water in a 2D piston chamber using CFD analysis in ANSYS Fluent. The geometry was created in ANSYS Design Modeler and meshed using ANSYS Meshing. Six DOF Dynamic Mesh technique employed to accommodate piston movement. The simulation utilizes the SST k-ω turbulence model and includes the energy equation for temperature analysis. The transient simulation examines density variations, pressure distributions, temperature changes, and velocity profiles within the piston chamber.

Price: $14

This study examines CH4 and H2 mixing in T-junction and Y-junction configurations using CFD analysis in ANSYS Fluent. The geometry was created in ANSYS Design Modeler and meshed with ANSYS Meshing, resulting in a high-quality mesh of 2,484,831 quadrilateral elements. The simulation utilizes the Standard k-ε turbulence model and Species Transport model for mixing. An isothermal mixing process is considered without chemical reactions. The analysis compares mixing efficiency, velocity profiles, pressure distributions, and species concentrations between T-junction and Y-junction designs.

Price: $330

This project investigates the combustion process in a cylindrical chamber with a porous medium using CFD analysis in ANSYS Fluent. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a high-quality mesh with 815,135 elements. The simulation employs the RNG k-ε turbulence model, Discrete Ordinate (DO) radiation model, and Species Transport model with Volumetric Reactions. Additional submodels for NOx and Soot formation are included. A cylindrical porous zone with 0.5 fluid porosity is incorporated near the inlet. The study demonstrates the impact of the porous medium on flow patterns, temperature distribution, species concentrations, and pollutant formation.

Price: $64

This project investigates turbocharger performance using CFD analysis in ANSYS Fluent, focusing on the fluid flow and thermal behavior of air through a one-sixth periodic sector of the geometry. The geometry was prepared using Vista CCD and BladeGen, and the mesh was generated with TurboGrid as a structured grid containing 972,176 cells. A pressure-based solver with the SST k-ω, k-ω turbulence model was used, and blade rotation was simulated at 92,000 RPM with the Frame Motion approach. The results highlight the influence of geometry on flow patterns, pressure distribution, and temperature gradients, offering insight into compression efficiency and overall turbocharger performance.

Price: $24

This project investigates the performance of a tube with twisted tape inserts and vortex generators in ANSYS Fluent. The study focuses on the cooling of hot alumina nanofluid flowing through the inner tube while exposed to external air flow. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing. The simulation uses a pressure-based solver with the RNG k-ε turbulence model and enabled energy equation for steady-state conditions. The study demonstrates the impact of twisted tape inserts and vortex generators on flow patterns, providing insights into heat transfer enhancement and cooling efficiency.