Design Modeler Online Courses

Price: $649

This study presents a Fluid-Structure Interaction (FSI) simulation of a quadcopter using ANSYS Fluent The quadcopter geometry was created using ANSYS SpaceClaim The model was then meshed using ANSYS Meshing, which generated an unstructured mesh consisting of approximately 499,152 elements To accurately capture the blades’ rotation, two frame motion(MRF) zones are applied to the blades. The Structure model with the Linear Elasticity option was enabled to investigate the displacement of the blade

Price: $12

This study presents a CFD analysis of a Multi-point Liquid Distributor for packed columns using ANSYS Fluent. We designed the 3-D symmetry model using the ANSYS Design Modeler We mesh the model with ANSYS Meshing software, and the element number equals 783,039. The Volume of Fluid (VOF) model was utilized to simulate the multiphase flow of water and air. A steady-state, pressure-based solver was employed for the simulation.

Price: $8

This study investigates the thermal and fluid dynamics behavior of a pin-fin heat exchanger using CFD simulation. The geometry of the pin-fin heat exchanger was created using ANSYS Design Modeler. The computational domain was then discretized using ANSYS Meshing, resulting in 1,679,530 elements. The pin wall temperature was set to a constant 800 K to simulate a high-temperature heat source

Price: $16

This report details a Computational Fluid Dynamics (CFD) simulation of a furnace using ANSYS Fluent. The study investigates combustion processes, species transport, and NOx production to optimize furnace design and reduce emissions. The simulation employs a steady-state, pressure-based solver with the Realizable k-epsilon turbulence model. Results include density stratification, species distribution, temperature gradients, and flow patterns, providing valuable insights into combustion dynamics and pollutant formation within the furnace.

Price: $80

The study investigates Evaporation-Condensation Process in a Porous Heat Exchanger using ANSYS Fluent. The geometry is created in ANSYS Design Modeler, with a mesh of 8,777,268 elements generated using ANSYS Meshing. The simulation employs a pressure-based transient solver with the k-epsilon turbulence model and Volume of Fluid (VOF) multiphase model. It conducts a time-dependent analysis with enabled condensation in mass transfer mechanisms to simulate phase change from vapor to liquid water. Also, the domain is considered to be porous.

Price: $14

The study investigates cavitation in water flow around a triangular obstacle using ANSYS Fluent CFD simulation. The geometry is created in ANSYS Design Modeler, with a mesh of 310,000 structured elements generated using ANSYS Meshing. The simulation employs a pressure-based transient solver with the k-epsilon turbulence model and Volume of Fluid (VOF) multiphase model. ANSYS Fluent conducts a time-dependent analysis with enabled cavitation in mass transfer mechanisms to simulate phase change from liquid water to vapor.

Price: $30

The problem numerically simulates the Fluid-Structure Interaction over Vertical Turbine using ANSYS Fluent software. We designed the 3-D model using the Design Modeler software. The mesh grid is generated using ANSYS Meshing, and the element number equals 705,465. The Frame Motion method is used to rotate the turbine. FSI model analyses total strain, and stress over the VAWT turbine.

Price: $30

The study conducts a CFD analysis of sand particle sedimentation using ANSYS Fluent software. We design the cylindrical geometry using ANSYS Design Modeler. We mesh the model using ANSYS Meshing software, resulting in 388,797 hexahedral elements. We use the Eulerian multiphase model to simulate three different sizes of sand particles (small, medium, and large) interacting with the fluid phase. We aim to predict the sedimentation patterns and particle distribution for different sand sizes, analyzing density, pressure, and volume fraction contours.

Price: $15

This project simulates the Fluid-Structure Interaction (FSI) of a high-speed airfoil using ANSYS Fluent software. The airfoil geometry is designed in ANSYS Design Modeler. ANSYS Meshing is used to generate a high-quality mesh with 2,398,833 elements. In this study, the complex flow behavior and structural response of the airfoil are simulated using a pressure-based transient solver and the Realizable k-epsilon turbulence model. The pressure distribution, velocity patterns, and airfoil displacement under high-speed conditions are well modeled in this project.