Design Modeler Online Courses
Here's every CFD online course related to Design Modeler category.
Price: $8
In this project, air-water mixing improvement using rings is simulated by ANSYS Fluent software. The geometry is designed in Design Modeler then meshed in ANSYS Meshing generating 6,342,465 cells. VoF model is activated to simulate mixing the two phases. The turbulence of the flow is simulated by Standard k-e model.
Price: $12
This project simulates a Packed Bed with catalyst Particles, modeled as heat source in ANSYS Fluent. The geometry is designed in Design modeler then meshed in ANSYS Meshing with 252,565 polyhedral cells. RNG k-ε model is activated as turbulence model. The radiation is taken into account in heat transfer with DO model.
Hydraulic Jump Investigation in Stepped Structures, ANSYS Fluent
Beginner, Intermediate
Price: $10
⦁ This problem simulates Hydraulic Jump Investigation in Stepped Structures, using Ansys Fluent software. ⦁ The 2-D geometry is designed in Design Modeler software. ⦁ ANSYS Meshing software is used to generate the mesh; the element number equals 76,048. ⦁ In this project, the Formation of hydraulic jump is simulated using the VoF model. ⦁ Flow energy loss in this project is well modeled.
Internal and External Ventilation in an Ancient Architecture, ANSYS Fluent
Beginner, Intermediate
Price: $10
In this project, Internal and External Ventilation in an Ancient Architecture, ANSYS Fluent is simulated using ANSYS Fluent. The 3-D geometry is designed in Design modeler. The meshing in ANSYS Meshing produced 12 millions cells then we made it 2,313,280 polyhedral cells in fluent setup. DO is chosen for the radiation model.
Price: $48
⦁ This problem simulates Bubble Columns Reactor using the VOF model in Ansys Fluent software. ⦁ The 2-D geometry is designed in Design Modeler software. ⦁ ANSYS Meshing software is used to generate the mesh; the element number equals 93,687. ⦁ In this project, the rising of air bubbles is simulated using the VOF model.
Price: $16
This project simulates Noise Reduction Using Chevron Nozzles in Jet Engines using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 1,317,762 elements was generated using ANSYS Meshing. The broadband noise source model was chosen to simulate noise generation and propagation.
Shrouded Micro-wind Turbine CFD Simulation, Paper Numerical Validation, ANSYS Fluent
Intermediate, Advanced
Price: $32
The current CFD Analysis numerically Validates the Paper "Experimental study of shrouded micro-wind turbine" via ANSYS Fluent software. We have designed and meshed the geometry using Design Modeler and ANSYS Meshing then meshing in fluent, producing 2,356,897 polyhedral elements. MRF is used to simulate rotating zone. The turbulence of the flow is simulated via K-w sst model.
Horizontal Axis Wind Turbine (HAWT), Paper Numerical Validation, ANSYS Fluent
Intermediate, Advanced
Price: $320
The current CFD Analysis numerically validates the Paper "CFD Investigation on the aerodynamic characteristics of a small-sized wind turbine of NREL PHASE VI operating with a stall-regulated method" via ANSYS Fluent software. We have designed and meshed the geometry using Spaceclaim and ANSYS Meshing then meshing in fluent, producing 5,466,728 elements. MRF is used to simulate rotating zone. The turbulence of the flow is simulated via Realizable k-epsilon model.
Price: $60
In this project, liquid fuel combustion is simulated using DPM module. The geometry was designed in SpaceClaim, and a mesh with 769000 elements was generated using ANSYS Meshing. The species transport module is employed. The fuel is ethanol and the oxidizer is nitrous oxide.