Design Modeler Online Courses
Here's every CFD online course related to Design Modeler category.
Price: $240
This project numerically simulates the Population Balanced Model Crystallization using ANSYS Fluent software. The 2-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 89,244. The multiphase Eulerian multiphase model simulates the mixture (water liquid, Ca, and CO3 ions) and Calcium-Carbonate. The crystallization modeling through PBM is also considered.
Price: $180
This project numerically simulates the Air Bubble PBM using ANSYS Fluent software. The 2-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 23,982. The multiphase Eulerian multiphase model simulates the two-phase flow of water and air. The population balance model also enables simulating bubble dynamics and interactions. Aggregation and Breakage kernels were activated, and the Luo model was used for both kernels. The mixture method for the turbulence interactions of the phases is activated.
Price: $220
This project numerically simulates the Hydro-Abrasive Erosion in Pelton Turbine using ANSYS Fluent software. The 3-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 6,433,121. The multiphase VOF model simulates the water jet. The 2-way DPM model also enables the erosion of the solution. The rotational movement of the turbine is modeled using Mesh Motion Approach.
Optimization of Shell & Tube Heat Exchanger with Baffle-Cut, Industrial CFD Simulation
Beginner, Intermediate
Price: $180
In this project, an industrial CFD simulation of the Optimization of Shell & Tube Heat Exchanger with Baffle-Cut has been carried out, and the simulation results have been investigated.
Price: $160
The problem numerically simulates the Water Jets Impingement using ANSYS Fluent software. The 3-D geometry is designed in Design Modeler software. We used ANSYS Meshing to generate mesh; the element number equals 72,000. The Automatic Mesh Adaptation is the mesh method for this problem. The liquid bulk in the domain is simulated using VOF model. Also, the droplets are modeled via DPM model.
Blade Film Cooling CFD Simulation, ANSYS Fluent Training
Beginner, Intermediate
Price: $12
The problem numerically simulates the Blade Film Cooling using ANSYS Fluent software. The 3-D geometry is designed in Design Modeler software. We used polyhedra mesh type in ANSYS Fluent , with 2,697,514 elements. We use the K-Omega SST model to simulate turbulence.
Price: $20
The problem numerically simulates the geothermal reservoir using ANSYS Fluent software. The 3-D model is designed in Design Modeler software. We mesh the model with ANSYS Meshing, and the element number equals 1,749,097. We use the Realizable k-epsilon model to simulate turbulence. Conductivity and heat capacity are considered temperature-dependent.
Wall Wavy Motion CFD Simulation, Dynamic Mesh
Intermediate
Price: $54
The problem numerically simulates the Wall Wavy Motion using ANSYS Fluent software. We design the 2-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 146,998. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define deforming and moving zones. We use the user-defined function (UDF) to define the wavy motion.
Lobe Pump CFD Simulation, ANSYS Fluent Training
Intermediate
Price: $96
The problem numerically simulates the Lobe Pump using ANSYS Fluent software. We design the 2-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 128,072. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh Model to define deforming and moving zones. We use the user-defined function (UDF) to define the rotational motion of lobes.