Mechanical Online Courses

Price: $64

This project investigates turbocharger performance using CFD analysis in ANSYS Fluent, focusing on the fluid flow and thermal behavior of air through a one-sixth periodic sector of the geometry. The geometry was prepared using Vista CCD and BladeGen, and the mesh was generated with TurboGrid as a structured grid containing 972,176 cells. A pressure-based solver with the SST k-ω, k-ω turbulence model was used, and blade rotation was simulated at 92,000 RPM with the Frame Motion approach. The results highlight the influence of geometry on flow patterns, pressure distribution, and temperature gradients, offering insight into compression efficiency and overall turbocharger performance.

Price: $14

This project investigates the aerodynamic performance enhancement of an airfoil through CFD analysis in ANSYS Fluent. Three configurations are studied: a clean airfoil, an airfoil with a slat, and an airfoil with both slat and flap. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in approximately 5 million elements. The simulations use a density-based solver to account for compressibility effects. The study demonstrates significant improvements in lift-to-drag ratio, particularly when both slat and flap are employed.

Price: $6

In this project, the flow around a projectile is modeled using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 2,871,393 elements was generated using ANSYS Meshing. In this project we are going to find the center of pressure and calculate the lift force on the projectile .

Price: $30

In this project, the electrical current caused by the electrical potential is modeled using ANSYS Fluent. Also, the magnetic field created by the electrical current and its body force is simulated. Three User-Defined Scalars (UDS) are added for calculating the electrical and magnetic properties, and five User-Defined Functions (UDF) are used for the computation of the magnetic equations' source terms, heat release from the electric field, and momentum body forces. The geometry was created in SpaceClaim, and a mesh consisting of 463,701 elements was generated using ANSYS Meshing. The improvement of the flow field in terms of separation on an airfoil NACA 0012 was investigated by using plasma at two velocities and angles of attack.

Price: $64

This project simulates an Archimedes Spiral Wind Turbine in ANSYS Fluent software. The geometry is designed in Solid works then meshed in ANSYS Meshing with 3,207,809 unstructured cells. The rotation of the blade is simulated via Mesh Motion. The turbulence of the air flow is modeled with SST k-w model.

Price: $10

The problem numerically simulates Centrifugal Blower using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 5,479,874 . We use the Mesh Motion method to define rotational motion in cell zone conditions.

Price: $10

In this project, moving shock and expansion waves in a shock tube were simulated using ANSYS Fluent. The interactions of shock and expansion waves, as well as the reflection of waves at the end wall, were investigated, and the x-t wave diagram for the modeled shock tube was plotted. The geometry was created in SpaceClaim, and a mesh consisting of 300,000 elements was generated using ANSYS Meshing. The turbulence model is defined as Inviscid.

Price: $64

In this project, a Gorlov vertical axis wind turbine is simulated using ANSYS Fluent software. The geometry is re-designed in ANSYS Spaceclaim software and meshed in ANSYS Meshing software. The angular motion is simulated using the sliding mesh (mesh motion) model.

Price: $8

In this project, air-water mixing improvement using rings is simulated by ANSYS Fluent software. The geometry is designed in Design Modeler then meshed in ANSYS Meshing generating 6,342,465 cells. VoF model is activated to simulate mixing the two phases. The turbulence of the flow is simulated by Standard k-e model.