Mechanical Online Courses

Price: $200

The computational fluid dynamics (CFD) analysis of a Francis turbine was conducted using ANSYS Fluent software to investigate its performance characteristics and flow behavior. This study aims to provide detailed insights into the pressure distribution, velocity patterns, and potential cavitation phenomena within the turbine system. The simulation incorporates advanced numerical models and careful consideration of boundary conditions to ensure accurate results.

Price: $20

The project utilized the ANSYS software suite to simulate and analyze the fluid behavior and cavitation characteristics under specific operating conditions. The initial phase of the project involved geometry creation using ANSYS Design Modeler, followed by mesh generation in ANSYS Meshing. The multiphase modeling approach utilized the Volume of Fluid (VOF) method, coupled with cavitation mechanisms to accurately represent the two-phase flow dynamics

Price: $24

This report presents a simulation examining how particle presence affects the friction force on the walls of two concentric cylinders using the Discrete Phase Method (DPM). The geometry of the two concentric cylinders was created using ANSYS SpaceClaim software. A high-quality mesh of 51840 hexahedral elements was generated using ANSYS Meshing software. Appropriate DPM settings were applied and the friction force exerted on the two cylinder walls was calculated.

Price: $10

This report presents a simulation of the particle stickiness in a bend pipe using Discrete Phase Method (DPM). The geometry of the bend pipe was created using ANSYS SpaceClaim software. A high-quality mesh of 1,664,000 hexahedral elements was generated using ANSYS Meshing software. Appropriate DPM settings were applied and the particle accretion rate was calculated on the bend pipe wall.

Price: $60

this report presents a FSI analysis of a HAWT using CFD. The geometry was created using ANSYS Design Modeler, and meshing was performed with ANSYS Meshing, resulting in a high-fidelity model with 3,465,821 cells. The simulation leverages (MRF) approach for rotating domains and dynamic mesh methods to capture the complex fluid-structure interactions. A two-way FSI approach was employed to capture the mutual interaction between the fluid flow and the structural deformation of the turbine blades.

Price: $39

Mechanical Engineering: Beginner CFD Training Package is a ten-project introduction to the core methods and applications of CFD in ANSYS Fluent. Moving from single-phase aerodynamics through compressible flow, mesh morphing, particle tracking, and multiphase modeling, it gives newcomers a hands-on, application-driven foundation in the techniques that underpin mechanical-engineering simulation — one real engineering case at a time.

Price: $28

In this project, the evaporation of soil moisture in a fluidized bed was simulated using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 22,000 elements was generated using ANSYS Meshing. The Eulerian model was chosen to simulate multiphase flow, and the species transport model was used to define the mixture in each phase. Evaporation was modeled using the evaporation-condensation method based on the Lee

Price: $56

This study investigates the aerodynamic performance of a turbine vane using CFD simulations with two different turbulence models The simulations were conducted using ANSYS Fluent, comparing the k-Omega SST and Large Eddy Simulation (LES) turbulence models The geometry of the turbine vane was created using ANSYS Design Modeler. The computational domain was then discretized using ANSYS Meshing, resulting in a high-resolution structured mesh of 12,634,415 elements

Price: $20

This report discusses the CFD simulation conducted for the Switchblade 300 using ANSYS Fluent software The geometry of the Switchblade 300 was created using SpaceClaim Initially, Using ANSYS Meshing, a non-conformal mesh with approximately 40 million tetrahedral cells was generated, after that We decided to change the mesh type to polyhedral in Ansys fluent to decrease the number of mesh elements from 40,000,000 to 7,000,000 The setup included a velocity inlet of 28.05 m/s, an angle of attack of 5 degrees, and a rotational speed of 5000 RPM