Mixture Online Courses

Price: $16

The problem numerically simulates Slurry Flow in Centrifugal Pump using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the polyhedra element number equals 1,498,132. We use the Frame Motion to define the rotational movement in the rotating zone. The Mixture multiphase model is activated to model the effect of solid particles.

Price: Free

Overview of Multiphase flows Classification of Multiphase flows Multiphase flow regimes Eulerian-Lagrangian vs. Eulerian-Eulerian approaches VOF model and its applications Eulerian model and its applications Mixture model and its applications Choosing among Eulerian, Mixture, and VOF Summary

Price: Free

Introduction Mixture model Wet steam model Summary

Price: $40

This tutorial simulates cavitation on a boat propeller using ANSYS Fluent. It applies the Mixture multiphase model with the Schnerr-Sauer cavitation model and mesh motion for the rotating propeller, and examines how pressure distribution and rotational speed drive vapor formation on the blades.

Price: $36

The problem numerically simulates the Hypersonic Combustion in Scramjet with Viscous Heating using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 16320. We perform this simulation as unsteady (Transient). We use the Species Transport model to define the combustion process.

Price: $949

In this project, Thermal Management of Battery (using Nano Fluid) has been simulated and the results of this simulation have been investigated.

Price: $80

In this project, Tank Filling with three phases (VOF) has been simulated and the results have been investigated.

Price: $520

The present problem simulates the surface evaporation process within a solar desalination system using ANSYS Fluent. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 8200. The present project is validated by a reference article. We perform this simulation as unsteady (Transient). We use the Mixture Multi-Phase model to define air, water and vapor. We used a UDF to define a mass transfer between water and vapor, based on surface evaporation.

Price: $32

The problem numerically simulates the Condensation inside a Shell and Tube Condenser using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 342486. We use the Mixture Multiphase model to define water and vapor. We define a mass transfer by the evaporation-condensation method.