Mixture Online Courses
Here's every CFD online course related to Mixture category.
Hydrate Formation in Elbow Pipe, Mixture Multiphase
Intermediate, Advanced
Price: $32
The problem numerically simulates hydrate formation flow inside a tube with a 90-degree elbow using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 55040. We use the Mixture Multi-Phase to define hydrate material. We define a Mass Transfer in the form of Evaporation-Condensation.
Price: $14
In this project, the effect of the steady rotation of a centrifugal turbine on a water and air two-phase mixture is investigated.
Price: $16
The problem numerically simulates the Fuel Injector using ANSYS Fluent software. We design the 3-D model by the Gambit software. We Mesh the model by Gambit software. The Mesh type is Structured, and the element number equals 932107. We use the Mixture Multi-Phase model to define three phases: air, liquid and vapor.
Nano Fluid in Heat Source Channel, Mixture Multiphase
Beginner, Intermediate
Price: $24
The problem numerically simulates the Nano Fluid Flows in a Heat Source Channel using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 2160625. We use the Mixture Multiphase model to define a nanofluid.
Three-Phase Flow of Water, Air, and Kerosene in a Porous Zigzag Channel CFD Simulation, ANSYS Fluent
Beginner, Intermediate
Price: $20
The problem numerically simulates the three-Phase Flow in a Porous Zigzag Channel using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 416000. We perform this simulation as unsteady (Transient). We use the VOF Multiphase model to define the three-Phase Flow of Water, Air, and Kerosene. We use the Porous medium in cell zone condition.
Distillation Column Tray CFD Simulation, Two Phase
Intermediate
Price: $24
The present problem simulates the two-phase flow of air and water in a distillation column tray.
Price: $240
The problem numerically simulates the surface evaporation of a falling water droplet using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 94800. We perform this simulation as unsteady (Transient). We use the Mixture Multi-Phase Model to define droplets inside the air. We use a UDF to define surface evaporation as the Mass Transfer rate between water and air.
Heat Exchanger with Baffle Cut and Mixture Nano Fluid
Beginner, Intermediate
Price: $28
A Shell and tube heat exchanger applying a Nanofluid is simulated by ANSYS Fluent software. 3-D Geometry is designed by Design Modeler software. The Heat exchanger was designed with a volume of 450,980 elements by ANSYS Meshing software. In order to model the Nano Fluid, a multi-phase model using the Mixture method was used.
Shell and Tube Heat Exchanger, Helical Fin, NanoFluid
Beginner, Intermediate
Price: $28
In this project, we simulate a Shell & Tube Heat Exchanger with Helical Fin considering NanoFluid, by ANSYS Fluent software. The 3-D geometry of shell and tube heat exchanger considering a helical tape is designed and meshed by Design modeler and ANSYS Meshing software, respectively. The nano-fluid is modeled by applying multiphase flow (Mixture method).