Multi-Phase Flow Online Courses

Price: $32

This study extends the previous simulation of the VA-111 Shkval rocket using ANSYS Fluent software by incorporating mass transfer to capture the cavitation effects The geometry is designed in SpaceClaim, and the meshing is performed using Fluent Meshing; the element number equals 257,000 polyhedral cells. The simulation uses the Pressure-based and VOF Multiphase model to define a two-phase flow To capture the cavitation effects, the Zwart-Gerber-BelAmri model is enabled

Price: $40

we are simulating the solar panel that is floated on the water surface,The simulation is 3D and the solar panels and performed by ANSYS Fluent. The geometry is designed using Spaceclaim software. Then, it is meshed in ANSYS Meshing. In total 479895 cells are generated. phases are modeled by Volume of Fluid multiphase model. The dynamic mesh can reproduce elements by remeshing and smoothing types. Also, the radiation is activated.

Price: $24

This study uses CFD simulation to investigate the water tank filling process The geometry of the tank was created using ANSYS Design Modeler, and the computational domain was discretized using ANSYS Meshing, resulting in over 135,000 elements The Volume of Fluid (VOF) model was employed to simulate the interaction between water and air phases A User-Defined Function (UDF) was implemented to control the time step size

Price: $12

This report details a nanoparticle simulation conducted using ANSYS Fluent The simulation geometry consists of a rectangular cuboid created in SpaceClaim . Meshing was performed in ANSYS Meshing, resulting in a grid of 151,294 triangular cells Discrete Phase Model (DPM) activated, Flow and turbulence equations deactivated

Price: $12

This study presents a CFD analysis of a Multi-point Liquid Distributor for packed columns using ANSYS Fluent. We designed the 3-D symmetry model using the ANSYS Design Modeler We mesh the model with ANSYS Meshing software, and the element number equals 783,039. The Volume of Fluid (VOF) model was utilized to simulate the multiphase flow of water and air. A steady-state, pressure-based solver was employed for the simulation.

Price: $14

This problem simulates a VA-111 Shkval rocket using ANSYS Fluent software. The geometry is designed in SpaceClaim, and the meshing is performed using Fluent Meshing; the element number equals 257,000 polyhedral cells. The simulation uses the Pressure-based and VOF Multiphase model to define a two-phase flow. The turbulence model is set to SST k-ω.

Price: $80

The study investigates Evaporation-Condensation Process in a Porous Heat Exchanger using ANSYS Fluent. The geometry is created in ANSYS Design Modeler, with a mesh of 8,777,268 elements generated using ANSYS Meshing. The simulation employs a pressure-based transient solver with the k-epsilon turbulence model and Volume of Fluid (VOF) multiphase model. It conducts a time-dependent analysis with enabled condensation in mass transfer mechanisms to simulate phase change from vapor to liquid water. Also, the domain is considered to be porous.

Price: $14

The study investigates cavitation in water flow around a triangular obstacle using ANSYS Fluent CFD simulation. The geometry is created in ANSYS Design Modeler, with a mesh of 310,000 structured elements generated using ANSYS Meshing. The simulation employs a pressure-based transient solver with the k-epsilon turbulence model and Volume of Fluid (VOF) multiphase model. ANSYS Fluent conducts a time-dependent analysis with enabled cavitation in mass transfer mechanisms to simulate phase change from liquid water to vapor.

Price: $48

This study simulates diesel-air mixture flow with fuel droplet evaporation using ANSYS Fluent CFD software. The 3D cylindrical chamber geometry is designed in SpaceClaim. Meshing is performed using ANSYS Meshing, resulting in over 2 million elements. The Species Transport model with Eddy-Dissipation is employed for turbulence-chemistry interaction. The Discrete Phase Model (DPM) is utilized to simulate fuel droplet movement and evaporation.