Multi-Phase Flow Online Courses

Price: $140

The study aims to optimize the mixing length and pressure balance within ethanol-gasoline T-shape pipeline systems, a critical factor for efficient fuel blending. Three distinct pipeline designs were evaluated, each with differing diameters (10-inch and 6-inch) to assess their effects on pressure drop and mixing efficiency This design successfully met all constraints, including maintaining the desired outlet ethanol volume fraction of 7.8% and ensuring the outlet pressure remained above 80 kPa, confirming the feasibility of using thinner pipelines for optimized fuel mix and flow conditions.

Price: $20

Simulate multiphase flow in complex T-shape geometries with high-fidelity CFD Eulerian and Dense Discrete Phase Modeling (DDPM) for sand-water interaction Apply transient solvers and advanced turbulence models in ANSYS Fluent Develop expertise in modeling sediment transport and particle-laden flows

Price: $18

The problem numerically simulates the performance of single-phase immersion cooling using ANSYS Fluent software. We design the 3-D model by the Space claim software. We Mesh the model by ANSYS Meshing software, and the element number equals1,591,373.. We perform this simulation as unsteady (Transient). We use the VOF Multi-Phase model to define Mass Transfer in the form of Evaporation-Condensation.

Price: $28

The problem numerically simulates a printed circuit board (PCB) cooling using ANSYS Fluent software. We design the 2-D model by the Space claim software. We Mesh the model by ANSYS Meshing software, and the element number equals 19106. We perform this simulation as unsteady (Transient). We use the VOF Multi-Phase model to define Mass Transfer in the form of Evaporation-Condensation.

Price: $260

This report presents the simulation of a reactive multiphase system incorporating heterogeneous Fischer-Tropsch synthesis reactions in a porous medium An iron (Fe) catalyst catalyzes the reactions, and the reaction rates are determined using Arrhenius kinetics. The Eulerian multiphase model is employed to investigate the interaction between different phases A Lee mass transfer model is applied for the phase change of water between liquid and gaseous states. A 2D geometry was created using SpaceClaim and The domain was meshed in ANSYS Meshing, using a structured mesh with 105,000 structured elements.

Price: $360

This project aimed to simulate the performance of a heat pump dryer designed for drying wet wood volatiles. The Volume of Fluid (VOF) method was employed to capture the interaction between air and liquid water phases. Species Transport Model was activated to simulate the mass transfer associated with water evaporation. A User-Defined Function (UDF) was developed to represent the evaporation process accurately.

Price: $30

This report presents a numerical simulation study of an open channel flow interacting with a rope and sphere using the Volume of Fluid (VOF) method. The geometry was created in SpaceClaim, meshed in ANSYS Meshing, and the flow field was solved using ANSYS Fluent. The drag forces obtained from Fluent were applied to the rope and sphere geometry in ANSYS Transient Structural.

Price: $22

Reactors with risers. This resulted in successfully modeling the FCC reaction-regeneration system in a single CFD example The 3D virtual full-loop CFD simulation provided a detailed and comprehensive perspective of the reaction regeneration system's performance The gas-solid interactions inside the FCC regenerator can be simulated using the Eulerian-Eulerian method The solid phase was treated using the Eulerian granular flow model The species transport model was implemented to monitor several chemical species

Price: $144

This study presents a detailed numerical investigation of cavitation phenomena in a gerotor pump using computational fluid dynamics (CFD) simulation The physical modeling incorporated a mixture model for multiphase flow A key aspect of the simulation was the implementation of dynamic mesh capabilities through User Defined Functions (UDFs)