Rotary Equipments Online Courses

Price: $54

The problem numerically simulates the Fluid-Structure Interaction over HAWT Turbine using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. Mesh grid is generated using ANSYS Meshing , and the element number equals 3,465,821. The MRF method is used to rotate the turbine. FSI model analyses total strain, and stress over the turbine.

Price: $330

The problem numerically simulates Darrieus vertical axis wind turbine using ANSYS Fluent software. We perform this simulation as unsteady (Transient). We perform the simulation according to a Reference Article and validate the power coefficient. We use the Sliding Mesh model to rotate the rotor of the wind turbine.

Price: $48

The problem numerically simulates a Multi-Stage Axial Compressor using ANSYS Fluent software. We design the 3-D model with the ANSYS Blade Gen. The meshing of the present model has been generated by TurboGrid software and the total cell number is 11,430 elements. The compressor motion has been modeled with the MRF method. The Turbo Workflow module was used to model the Compressor.

Price: $72

CFD analyses For HAWT and VAWT using ANSYS Fluent software. Paper Validation For HAWT. 3-D modeling with the ANSYS Design Modeler and mesh Generation with ANSYS Meshing. The Multiple Reference Frame (MRF) or Frame Motion method is applied for HAWT. The Mesh Motion method is applied for VAWT.

Price: $220

The problem numerically analyses different Acoustic Models on a HAWT using ANSYS Fluent software. We design the 3-D model with the ANSYS Design Modeler and mesh the present model with ANSYS Meshing. The Horizontal Axis Wind Turbine sound generation and noise propagation. Ffowcs Williams-Hawkings (FW-H) Vs. Broadband noise models.

Price: $72

The problem numerically simulates a Multi-Stage Axial Gas Turbine using ANSYS Fluent software. We design the 3-D model with the ANSYS Blade Gen. The meshing of the present model has been generated by TurboGrid software and the total cell number is 12,182 elements. The compressor motion has been modeled with the MRF method. The Turbo Workflow module was used to model the turbine.

Price: Free

Rotating Frames Frame Motion technique Single reference frame (SRF) Multiple reference frame (MRF) Mesh Motion Sliding Mesh Comparison between Frame Motion and Mesh Motion techniques

Price: $14

The problem numerically simulates a Turboprop Engine Propeller using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The element number equals 9,622,423. Multiple Reference Frames (Frame Motion) are used to model the rotational motion of the propeller. The Density-Based solver is used.

Price: $10

The problem numerically simulates the High-Bypass Turbofan Engine using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The element number equals 16,635,982. The MRF method (Frame Motion) is used to define fan rotation.