Solar Energy Online Courses
Here's every CFD online course related to Solar Energy category.
Radiant Solar Collector Applying PCM: Numerical Analysis and Heat Transfer CFD Simulation by ANSYS Fluent
Intermediate, Advanced
Price: $120
In this project, the numerical investigation of a radiant solar collector is conducted utilizing ANSYS SpaceClaim software, inspired by advanced modeling techniques. The 3D geometry is meticulously crafted and meshed with 647,500 elements, emphasizing an unstructured grid and refinement near the tubes to enhance simulation accuracy. The RNG K-epsilon turbulence model serves as the foundation for simulating the flow field, while the solidification and melting module addresses the PCM zone characteristics. Momentum, turbulence, and energy equations are tackled using the SIMPLE algorithm with second-order upwind discretization for precision. The simulation focuses on fluid dynamics and heat transfer, crucial for understanding the collector's performance under variable environmental conditions, despite the exclusion of radiation effects.
Solar Chimney Optimization: DOE Applying OSFD Method
Intermediate, Advanced
Price: $180
This product presents Solar Chimney Optimization using ANSYS software. We model with the Design Modeler software; we mesh with ANSYS Meshing software. We use the Design Exploration tool to perform the optimization process. We use the Optimal Space-Filling Design in the Design of Experiment (DOE). We use the Genetic Aggregation and the Response Surface Methodology (RSM).
PCM-Enhanced PV Panel, Ansys Fluent CFD Simulation
Intermediate, Advanced
Price: $54
In this product, we conducted a comprehensive study comparing two distinct cases1) A conventional PV panel without pCM 2) An enhanced system incorporating PCM cooling technology comprehensive three-dimensional model was developed using ANSYS SpaceClaim,The computational domain was discretized using ANSYS Meshing software, employing a structured grid approach with approximately 1,000,000 elements The Solidification and Melting model was activated to accurately capture the phase change dynamics of the PCM The Discrete Ordinates (DO) radiation model was implemented to account for radiative heat transfer Solar Ray Tracing was enabled for precise solar load calculations
Floating Solar Panel CFD Simulation, ANSYS Fluent Tutorial
Intermediate, Advanced
Price: $40
we are simulating the solar panel that is floated on the water surface,The simulation is 3D and the solar panels and performed by ANSYS Fluent. The geometry is designed using Spaceclaim software. Then, it is meshed in ANSYS Meshing. In total 479895 cells are generated. phases are modeled by Volume of Fluid multiphase model. The dynamic mesh can reproduce elements by remeshing and smoothing types. Also, the radiation is activated.
Price: $24
In this project, a Parabolic Through reflector is simulated using ANSYS Fluent software. The geometry is designed using Spaceclaim software, then ANSYS Meshing software is used to generate 1,330,520 Polyhedral elements. Discrete Ordinates (DO) model is employed to simulate radiation.
Solar Oven CFD Simulation, ANSYS Fluent Training
Intermediate
Price: $10
In this project, a Cooking Pot in a Solar Oven is simulated using ANSYS Fluent software. The geometry is created in SpaceClaim, and a mesh consisting of 989,310 elements is generated using ANSYS Meshing. The Discrete Ordinates (DO) model is chosen to simulate radiation heat transfer.
Solar Indirect Dryer CFD Simulation, ANSYS Fluent
Intermediate, Advanced
Price: $48
In this project, the airflow within a solar indirect dryer is simulated using ANSYS Fluent. The geometry was designed in SpaceClaim, and a mesh with 1,330,000 elements was generated using ANSYS Meshing. In this simulation, the food trays are modeled as porous. DO is chosen for the radiation model. The density model in the material is chosen as incompressible ideal gas.
Trombe Wall CFD Simulation, Paper Numerical Validation, ANSYS Fluent
Intermediate, Advanced
Price: $360
The current CFD Analysis numerically Validates the Paper "The thermal performances of a solar wall" via ANSYS Fluent software. We have designed and meshed the geometry using Design Modeler and ANSYS Meshing, producing 26,550 structured cells. UDF is used for the heat source in the absorber.
Water-Cooled Photovoltaic Thermal (PVT) System using Nanofluid, Paper Numerical Validation
Intermediate, Advanced
Price: $360
The current CFD Analysis numerically Validates the Paper "Numerical investigation on using of nanofluid in a water-cooled photovoltaic thermal systems" via ANSYS Fluent software. We have designed and meshed the geometry using Design Modeler, producing structured cells. UDF in SOURCE Macro is used for the heat generation.