CFD Beginner Courses

Price: Free

Introduction to the Fuel Cell models in ANSYS Fluent software Introduction to the "Fuel Cell and Electrolysis" model ("PEMFC", "SOFC", and "Electrolysis" sub-models) Introduction to the "PEM Fuel Cell" model Introduction to the "SOFC with unresolved electrolyte" model Introduction to the electrochemistry concepts and electrochemical reactions Introduction to the different thermophysical properties Introduction to the user-defined scalars (UDS) and user-defined Memory (UDM)

Price: $8

The problem numerically simulates a Microchannel Heat Sink in ANSYS Fluent software investigating heat transfer and temperature distribution. The geometry of the model is created using SpaceClaim software. The model is meshed in ANSYS Meshing, creating a structured mesh with 440,000 elements.

Price: $12

The problem numerically simulates a mixing pipe, baffle configuration effect on mixing in ANSYS Fluent software. The 3D geometry of the model is created in SpaceClaim software. The model is meshed in ANSYS Meshing creating structural mesh with 1,330,000 , 1,380,000 and 1,500,000 elements for the different cases. The K-ω SST model is used to describe turbulence of the flow.

Price: $12

The problem numerically simulates a Rotary Heat Exchanger, Effect of Mass Flow Rate on heat transfer coefficient in ANSYS Fluent software. The 2D geometry of the model is created in Design Modeler software. The model is meshed in ANSYS Meshing creating 86,598 elements. The Standard k-epsilon model is used to describe turbulency of the flow.

Price: $140

In this project, we have simulated the performance of a Mist Eliminator using ANSYS Fluent software. Three-dimensional modeling was done using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number equals 2,062,734. The Discrete Phase Model (DPM) is used to model water-liquid particles in transient mode. The Realizable K-epsilon model is selected for turbulence characteristics of fluid flow.

Price: Free

Introduction to USer-Defined Function (UDF) in ANSYS Fluent software Introduction to UDF running methods Introduction to Mesh Terminology Introduction to Model-Specific Macros category Introduction to General Purpose Macros category Introduction to Multiphase Macros category Introduction to Discrete Phase Model (DPM) Macros category Introduction to Dynamic Mesh Macros category Introduction to Additional Macros category

Price: $20

In this project, we have simulated performance of a Bladeless Fan using ANSYS Fluent software. Three-dimensional modeling was done using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number equals 1,927,707. The standard k-epsilon model is used to simulate the turbulence of the flow.

Price: Free

Introduction What is the particle state vector? What is the number density function? Discrete method Inhomogeneous discrete method Standard moment method Quadrature moment method DQMOM Summary

Price: $180

In this project, an industrial CFD simulation of the Optimization of Shell & Tube Heat Exchanger with Baffle-Cut has been carried out, and the simulation results have been investigated.