CFD Beginner Courses
Here's every CFD online course in the Beginner level.
Pollution of the Street between Buildings CFD Simulation
Beginner, Intermediate
Price: $20
The problem numerically simulates the Pollution of the Street between Buildings using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 274,496. The Species Transport model is used to simulate the pollutant.
Labyrinth spillway CFD Simulation
Beginner, Intermediate
Price: $42
The problem numerically simulates the Labyrinth spillway using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the Polyhedra element number equals 99,248. The VOF Multiphase model is selected to define water and air in channels.
Single Reference Frame (SRF) Axial Pump CFD Simulation
Beginner, Intermediate, Advanced
Price: Free
The problem numerically simulates the Axial Pump using ANSYS Fluent software. We design the 3-D model by the SpaceClaim software. We Mesh the model by ANSYS Meshing software, and the element number equals 36,865. The Single Reference Frame is defined to model rotational movement.
Price: $12
The problem numerically simulates a perforated plate (Porous Zone) inside 3D Channel using ANSYS Fluent software. We modeled the geometry using ANSYS Design Modeler and created the mesh using ANSYS Meshing software. The mesh type is Structured and the number of them is 14,544. Porosity has been used in the simulation. Pressure Drop inside the channel due to porosity is investigated.
Compressible Flow in a Bent Pipe CFD Simulation
Beginner, Intermediate
Price: Free
The present CFD Project simulates Compressible Flow in a Bent Pipe via ANSYS Fluent software. We modeled the geometry using ANSYS Design Modeler software and created the mesh using ANSYS Meshing software. The number of cells after refinement is 1,450,983. The solution has been solved Transiently. The solver is Density-Based to capture the compressibility of the flow.
Price: $100
This problem simulates the Plate Heat Exchanger by ANSYS Fluent software. The geometry of the present model is drawn by Design Modeler software and then meshed by ANSYS Meshing software. The cell number equals 2,216,379. Energy Equation is enabled. Both Conduction and Convection happen in the domain (Conjugated Heat Transfer (CHT)).
Price: Free
Thermal Analysis in a storage tank via ANSYS Fluent software. We have designed the initial geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software. The mesh type is structured with 10,056 cells. Energy Equation is enabled to capture the temperature. The Mixing & Convection phenomena are involved in this simulation.
Spoiler Angle Effect, Aerodynamic Analysis, Paper Numerical Validation, ANSYS Fluent Tutorial
Beginner, Intermediate
Price: $16
The current CFD Analysis Validates the Paper 'Effect of spoiler angle on the aerodynamic performance of hatchback model' via ANSYS Fluent software. We have designed the geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is Polyhedra with 935,500 cells. The k-epsilon turbulence model is used in this simulation. The Pressure Coefficient parameter is compared and validated with the article results.
PCM Components in Hot Water Tank Thermal Analysis (Load & Discharge), CFD Simulation Training
Beginner, Intermediate
Price: $36
In this project, PCM components in a hot water tank are simulated.