CFD Beginner Courses
Here's every CFD online course in the Beginner level.
Price: $16
The problem numerically simulates airflow over an airfoil (NACA4421) with a slot on the leading edge using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 260000. We aim to study the aerodynamic performance of the wing (drag and lift).
Price: Free
The problem numerically simulates a Cylindrical Heat Source using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1600000. We define an Energy Source to define the heat from the aluminum cylinder body.
Price: Free
In this project, a 3D CFD simulation of a 4-layer planar heat exchanger is investigated.
Price: Free
The problem numerically simulates the conjugate heat transfer of airflow in a simplified 4-story wind tower using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 6375. The Boussinesq model is used to apply the air density changes due to temperature change.
Price: Free
In this project, the heat transfer process on a rough surface having small serrated fringes is analyzed and simulated.
Vertical Axis Wind Turbine (VAWT): Paper Numerical Validation
Beginner, Intermediate, Advanced
Price: $320
This project uses ANSYS Fluent to numerically simulate a vertical axis wind turbine (VAWT). The project is validated against a reference article. The 3D model is built in SpaceClaim. The model is meshed in ANSYS Meshing, with an element count of 1,650,940. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational motion.
Price: $8
The heat transfer inside a double pipe heat exchanger with dish-shaped strip inserts is investigated in this project.
Nanofluid and Twisted Tape Inserts in a Tube, Validation
Beginner, Intermediate
Price: $72
The problem numerically simulates the Al2O3-Water Nanofluid in a Tube with Twisted Tape Inserts using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 2148662. We define Nanofluid with two methods, including the Multiphase model and fluid properties. This simulation is validated with a reference article.
shell and tube with staggered baffles, Paper Validation
Beginner, Intermediate
Price: $200
The problem numerically simulates the shell and tube heat exchanger with staggered baffles using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 8031342. This simulation is validated with a reference article.