CFD Beginner Courses
Here's every CFD online course in the Beginner level.
Ogee Spillway CFD Simulation, ANSYS Fluent Training
Beginner, Intermediate
Price: $28
The problem numerically simulates the Ogee Spillway using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 10959. We use the VOF Multi-Phase model to define water and air in channels.
Price: $16
The problem numerically simulates Chevron Plate Heat Exchanger using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 638892. The Energy equation is activated to consider heat transfer in the heat exchanger.
Price: Free
The present study investigates the fluid flow passing through a circular cross-section tube with a wavy tape inside it.
Parabolic Solar Collector, ANSYS Fluent CFD Simulation Tutorial
Beginner, Intermediate
Price: $16
The problem numerically simulates the Parabolic Solar Collector using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1475000. We use thermal boundary conditions to apply the radiation effect.
Phase Change Material (PCM) in a Finned Tube, ANSYS Fluent CFD Simulation Training
Beginner, Intermediate
Price: $20
The problem numerically simulates the Phase Change Material (PCM) in a Finned Tube using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 107718. We perform this simulation as unsteady (Transient). We use the Solidification and Melting model to define phase change materials.
Heat Exchanger with Baffle Cut and Mixture Nano Fluid
Beginner, Intermediate
Price: $28
A Shell and tube heat exchanger applying a Nanofluid is simulated by ANSYS Fluent software. 3-D Geometry is designed by Design Modeler software. The Heat exchanger was designed with a volume of 450,980 elements by ANSYS Meshing software. In order to model the Nano Fluid, a multi-phase model using the Mixture method was used.
Pollution in a Real Urban Zone, ANSYS Fluent CFD Simulation Training
Beginner, Intermediate
Price: $20
The problem simulates a mass fraction of carbon dioxide changes as the pollutant in an urban street by ANSYS Fluent software. The present model is three-dimensional and is drawn using the Design Modeler software. The meshing is done using ANSYS Meshing software. The element number is 4137570. Simulation using the Species Transport solves a Transport Equation for each component of the pollution mixture. The simulation is Transient since the goal is to study changes in carbon dioxide concentration over time.
Price: $24
The present problem simulates the flow of water through a spillway by ANSYS Fluent software. The 3-D geometry of the present model is designed using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number is 698691. The Transient solver is applied. To define the two-phase flow in this simulation, a Multiphase VOF (volume of fluid) model is used, considering the Free Surface model.
Shell and Tube Heat Exchanger, Helical Fin, NanoFluid
Beginner, Intermediate
Price: $28
In this project, we simulate a Shell & Tube Heat Exchanger with Helical Fin considering NanoFluid, by ANSYS Fluent software. The 3-D geometry of shell and tube heat exchanger considering a helical tape is designed and meshed by Design modeler and ANSYS Meshing software, respectively. The nano-fluid is modeled by applying multiphase flow (Mixture method).