CFD Intermediate Courses
Here's every CFD online course in the Intermediate level.
Price: $20
The problem numerically simulates the performance of a mixing tank using ANSYS Fluent software. We design the 3-D model by the Design Modeler and create the mesh using ANSYS Meshing software. The element number equals 209,328. The Mesh Motion option is enabled to define the rotational motion of the impellers. Transient Solver is applied.
Vertical Axis Wind Turbine (VAWT) CFD Simulation by Mesh Motion Method, ANSYS Fluent Training
Intermediate
Price: $42
The problem numerically simulates the Vertical Axis Wind Turbine (VAWT) using ANSYS Fluent software. We design the 3-D model by the Design Modeler and create the mesh using ANSYS Meshing software. The element type is Hybrid (Structured and Unstructured) and their number equals 904,145. The Mesh Motion option is enabled to define the rotational motion of the wind turbine.
Horizontal Axis Wind Turbine (HAWT) CFD Simulation by MRF Method, ANSYS Fluent Tutorial
Intermediate
Price: $140
The problem numerically simulates the Horizontal Axis Wind Turbine (HAWT) using ANSYS Fluent software. We design the 3-D model by the Design Modeler and create the mesh using ANSYS Meshing software. The element number equals 2,696,011. The MRF option (Frame Motion) is enabled to define the rotational motion of the wind turbine.
Ramjet Engine, Design and Combustion Optimization (SR-71 Blackbird), Industrial Application
Intermediate, Advanced
Price: $390
In this project, an industrial Ramjet Engine has been numerically simulated by ANSYS Fluent software. Studying Combustion, Mach Number, Pressure, Density (Compressible Flow), and Thermal analysis. Optimizing the Thrust number. Ramjet Design Improvement. RSM analysis applying DOE.
Price: $20
The current CFD Analysis simulates the flow around a cylinder to investigate its aeroacoustics condition. We have designed the initial geometry using ANSYS Design modeler software and created the mesh using ANSYS meshing software. The simulation is dependent on time so is performed in transient form. The Wave equation acoustic model has been used for acoustic modeling.
Price: $20
The current CFD Analysis simulates the flow around a cylinder to investigate its aeroacoustics condition. The simulation is dependent on time so is performed in transient form. The Ffwocs Williams & Hawkings Acoustic Model has been used for acoustic modeling.
Price: $20
The current CFD Analysis simulates the flow around a cylinder to investigate its aeroacoustics condition. The simulation is dependent on time so is performed in transient form. The Broadband Noise Sources Acoustic Model has been used for acoustic modeling.
Screw pump CFD Simulation, ANSYS Fluent Training
Intermediate
Price: $14
The problem numerically simulates the Screw Pump using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 3,886,425. The simulation is performed as unsteady (Transient). We use the Volume of Fluid (VOF) model to define the different phases of the solution. The Mesh Motion option is used to model the rotational movement of the pump.
Surface injection using DPM CFD Simulation
Beginner, Intermediate
Price: $16
The problem numerically simulates the Surface Injection using ANSYS Fluent software. We design the 3-D model by the Design Modeler and mesh the model with ANSYS ICEM software. The mesh type is Structured, and the element number equals 92,809. We perform this simulation as unsteady (Transient). The Discrete Phase Model (DPM) model defines the particle's movement.