CFD Intermediate Courses
Here's every CFD online course in the Intermediate level.
Price: $120
The problem numerically simulates the Sedimentation in Urban Sewer Conduits using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 14280. We use the dense discrete phase model (DDPM)to define water and sand particles.
Non-Premixed Combustion, ANSYS Fluent CFD Simulation Training
Beginner, Intermediate
Price: $32
The problem numerically simulates Non-Premixed Combustion using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 11202. We use the Species Model to define the chemical reaction between fuel and oxidizer. We select the Non-Premixed Combustion because the fuel and oxidizer enter the chamber from separate paths.
Price: $42
The problem numerically simulates the Solar Heat Exchanger using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 304200. We use Discrete Ordinates (DO) and Solar Ray Tracing to consider radiation heat transfer.
Price: $48
The present problem simulates the collision of air and water flow within a separator chamber using ANSYS Fluent software.
Multiphase Flow in Porous Medium, Filter Cake Formation, ANSYS Fluent CFD Simulation Training
Intermediate
Price: $72
The problem numerically simulates the Multiphase Flow in Porous Medium using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. the mesh type is Structured, and the element number equals 572852. We perform this simulation as unsteady (Transient). We use the Eulerian Multiphase model to define a two-phases flow. We use the Porous medium in cell zone condition.
Rampressor, ANSYS Fluent CFD Simulation Training
Intermediate
Price: $36
The present problem simulates the air compression inside a Rampressor using ANSYS Fluent software.
Centrifugal Compressor ANSYS Fluent CFD Simulation
Intermediate
Price: $16
The problem numerically simulates Centrifugal Compressor with a diffuser using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 303600. We use the Frame Motion method to define rotational motion for the centrifugal compressor.
Liam F1 Wind Turbine CFD Simulation by ANSYS Fluent
Intermediate
Price: $140
The problem numerically simulates the airflow field adjacent to Liam F1 Wind Turbine using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1249235. We perform this simulation as unsteady (Transient). We use the Frame Motion to define the rotational motion of the wind turbine.
Airflow Modeling over a Flying Bird, CFD Simulation
Beginner, Intermediate
Price: Free
Aerodynamic Engineering Aerodynamic Coefficients