Motion Modeling & Moving Zones GOLDEN Training Package
Price:
$19,772
$5,219
The Motion Modeling & Moving Zones GOLDEN Training Package delivers +185 ANSYS Fluent tutorials, transforming teams into experts with instant project readiness. Tailored for professors, CEOs, and firms, it covers MRF, mesh motion, and dynamic mesh for pumps, fans, mixers, and Pelton, tidal, and wind turbines, jet engines, pistons, 6DOF motion, oscillating flows, one-way and two-way FSI, thermal FSI, and DEM-coupled moving geometries, plus UDF-driven motion for solids, sloshing, and aerodynamic forces. Includes step-by-step exercises, 1-year support, 3-month HPC, lifetime updates, and 15 years of MR CFD expertise for stress-free onboarding and competitive edge.
Motion Modeling & Moving Zones GOLDEN Training Package
Price:
$19,772
$5,219
The Motion Modeling & Moving Zones GOLDEN Training Package delivers +185 ANSYS Fluent tutorials, transforming teams into experts with instant project readiness. Tailored for professors, CEOs, and firms, it covers MRF, mesh motion, and dynamic mesh for pumps, fans, mixers, and Pelton, tidal, and wind turbines, jet engines, pistons, 6DOF motion, oscillating flows, one-way and two-way FSI, thermal FSI, and DEM-coupled moving geometries, plus UDF-driven motion for solids, sloshing, and aerodynamic forces. Includes step-by-step exercises, 1-year support, 3-month HPC, lifetime updates, and 15 years of MR CFD expertise for stress-free onboarding and competitive edge.
Price: $200
The computational fluid dynamics (CFD) analysis of a Francis turbine was conducted using ANSYS Fluent software to investigate its performance characteristics and flow behavior. This study aims to provide detailed insights into the pressure distribution, velocity patterns, and potential cavitation phenomena within the turbine system. The simulation incorporates advanced numerical models and careful consideration of boundary conditions to ensure accurate results.
Turgo Turbine Cavitation: CFD Analysis
Intermediate, Advanced
Price: $20
The project utilized the ANSYS software suite to simulate and analyze the fluid behavior and cavitation characteristics under specific operating conditions. The initial phase of the project involved geometry creation using ANSYS Design Modeler, followed by mesh generation in ANSYS Meshing. The multiphase modeling approach utilized the Volume of Fluid (VOF) method, coupled with cavitation mechanisms to accurately represent the two-phase flow dynamics
Fluid-Structure Interaction over HAWT Turbine Vibration (two-way)
Intermediate, Advanced
Price: $60
this report presents a FSI analysis of a HAWT using CFD. The geometry was created using ANSYS Design Modeler, and meshing was performed with ANSYS Meshing, resulting in a high-fidelity model with 3,465,821 cells. The simulation leverages (MRF) approach for rotating domains and dynamic mesh methods to capture the complex fluid-structure interactions. A two-way FSI approach was employed to capture the mutual interaction between the fluid flow and the structural deformation of the turbine blades.
Taxi Drone, Ansys Fluent Simulation
Intermediate
Price: $319
Taxi Drone Ansys Fluent Simulation involves using advanced CFD software to analyze the aerodynamic performance of urban air mobility vehicles The geometry of the taxi drone was designed using ANSYS SpaceClaim , The mesh was generated using ANSYS Meshing, resulting in a total of 2,829,977 elements The velocity inlet was set to 30 m/s with an angle of attack of 5 degrees. The rotational speed of the blades was configured with MRF method at 5000 RPM, with the upper and lower blades rotating in opposite directions.
Switchblade 300 Drone, Transient Ansys Fluent CFD Simulation
Intermediate, Advanced
Price: $20
This report discusses the CFD simulation conducted for the Switchblade 300 using ANSYS Fluent software The geometry of the Switchblade 300 was created using SpaceClaim Initially, Using ANSYS Meshing, a non-conformal mesh with approximately 40 million tetrahedral cells was generated, after that We decided to change the mesh type to polyhedral in Ansys fluent to decrease the number of mesh elements from 40,000,000 to 7,000,000 The setup included a velocity inlet of 28.05 m/s, an angle of attack of 5 degrees, and a rotational speed of 5000 RPM
Switchblade 300 (steady-state), Ansys Fluent CFD Simulation
Intermediate, Advanced
Price: $319
This study focuses on the aerodynamic analysis of the Switchblade 300 using ANSYS Fluent Two scenarios are simulated: one with the rear blade stationary and the other with the rear blade in motion. The geometry of the Switchblade was created using SpaceClaim software,The meshing was performed in Fluent Meshing, utilizing a polyhedral mesh with over 7,600,000 elements The Multiple Reference Frame (MRF) approach was employed to simulate the rotating rear blade at 5000 RPM.
Floating Solar Panel CFD Simulation, ANSYS Fluent Tutorial
Intermediate, Advanced
Price: $40
we are simulating the solar panel that is floated on the water surface,The simulation is 3D and the solar panels and performed by ANSYS Fluent. The geometry is designed using Spaceclaim software. Then, it is meshed in ANSYS Meshing. In total 479895 cells are generated. phases are modeled by Volume of Fluid multiphase model. The dynamic mesh can reproduce elements by remeshing and smoothing types. Also, the radiation is activated.
Price: $649
The problem numerically simulates the Dynamic Stability Derivatives of Quadcopter using ANSYS Fluent We designed the 3-D symmetry model using the SpaceClaim We mesh the model with ANSYS Meshing software, and the element number equals 1,710,236. We perform this simulation as unsteady (Transient). We use the Mesh Motion and UDF files to define the rotational and oscillation motion of the Quadcopter and blades.
Quadcopter Fluid-Structure Interaction (FSI) Simulation using ANSYS Fluent
Intermediate, Advanced
Price: $649
This study presents a Fluid-Structure Interaction (FSI) simulation of a quadcopter using ANSYS Fluent The quadcopter geometry was created using ANSYS SpaceClaim The model was then meshed using ANSYS Meshing, which generated an unstructured mesh consisting of approximately 499,152 elements To accurately capture the blades’ rotation, two frame motion(MRF) zones are applied to the blades. The Structure model with the Linear Elasticity option was enabled to investigate the displacement of the blade
The Motion Modeling & Moving Zones GOLDEN Training Package is MR CFD’s most complete ANSYS Fluent collection for simulating moving, rotating, and deforming geometry, with +185 hands-on tutorials that take you from first setup to advanced, publication-level modeling. Built for professors, CEOs, research teams, and engineering firms, it gives your group a ready-to-use project library, so new members become productive quickly and ongoing work starts from proven templates.
Moving Reference Frame (MRF): Set up steady rotating-zone simulations of centrifugal pumps in 2D and 3D, fans with combined acoustic and aerodynamic analysis, mixers, compressors, turbines, and VTOL jet engine thrust generation. Cover Pelton turbines with acoustic analysis, FSI, and cavitation.
Moving and sliding mesh: Run transient rotor-stator simulations with mesh motion, including centrifugal pumps compared against MRF, Savonius VAWT turbines, airfoil flow over a sinusoidal surface, and tidal turbines. Add multiphase and particle coupling with rotary seed dryers using DPM and moving mesh.
Dynamic mesh: Model smoothing, remeshing, and layering for oscillating multiphase flow, balloon pumping in an aorta, twin screw extruders with DEM and dynamic mesh, 6DOF motion, and pump and cavitation cases with deforming domains.
UDF-driven motion: Control motion with user-defined functions for cylinder-piston systems, solid movement, rotational and oscillating motion, sloshing and aerodynamic forces, and velocity and mass flow rate profiles.
Fluid-structure interaction: Work through intrinsic FSI and System Coupling concepts, two-way flap FSI, wind turbine blades, airfoils, turbine vibration, and thermal FSI for T-junction and bent pipes.
What’s included:
Step-by-step exercises with complete setup, meshing, solving, and post-processing
Projects spanning beginner, intermediate, and advanced levels
1-year technical support
3-month HPC access
Lifetime updates
Backed by 15 years of MR CFD simulation expertise
Whether you’re preparing a research paper, optimizing a rotating machine, or building in-house CFD capability, this package gives you the knowledge, tools, and confidence to deliver faster and stay ahead of the competition.