Price: $429

This report presents a simulation of the motion of a javelin rocket using the dynamic mesh method The geometry of the javelin rocket is created using Spaceclaim software A high-quality mesh is generated around the rocket geometry using ANSYS Meshing(about 250,000 elements) The six DOF solver settings are specified, including the mass properties and the degrees of freedom for translation and rotation.

Price: $30

The problem numerically simulates the Fluid-Structure Interaction over Vertical Turbine using ANSYS Fluent software. We designed the 3-D model using the Design Modeler software. The mesh grid is generated using ANSYS Meshing, and the element number equals 705,465. The Frame Motion method is used to rotate the turbine. FSI model analyses total strain, and stress over the VAWT turbine.

Price: $64

This study simulates powder distribution in a stationary fluid after mixing using ANSYS Fluent. The geometry, representing a mixer tank with a rotating propeller, is designed in ANSYS SpaceClaim and meshed using ANSYS Meshing, resulting in about 3,000,000 cells. The simulation is conducted as a transient analysis for a limited time period. The Eulerian multiphase model is employed, with the granular option activated for the powder phase. Mesh motion is enabled to model the propeller rotation at 30 rpm.

Price: $14

This study investigates the airflow dynamics of a 2D wind turbine using CFD analysis in ANSYS Fluent. The 2D geometry was created in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a tetrahedral mesh of 60,912 elements. The simulation utilizes a dynamic mesh feature with remeshing and smoothing methods, coupled with a Six DOF (Degree of Freedom) model for turbine rotation. A transient, pressure-based solver captures time-dependent flow characteristics. The simulation examines airflow patterns, velocity distributions, and turbine performance over multiple time steps, visualized through velocity magnitude contours.

Price: $56

This study investigates the flow dynamics in a steam turbine using CFD analysis in ANSYS Fluent. The 3D geometry was created in SpaceClaim and meshed using ANSYS Meshing, resulting in about 19 million tetrahedral elements. The simulation utilizes the Realizable k-ε turbulence model with standard wall function and includes the energy equation for temperature analysis. A density-based solver with real-gas-peng-robinson model is employed for compressible flow.

Price: $12

This study investigates the flow dynamics of air and water in a 2D piston chamber using CFD analysis in ANSYS Fluent. The geometry was created in ANSYS Design Modeler and meshed using ANSYS Meshing. Six DOF Dynamic Mesh technique employed to accommodate piston movement. The simulation utilizes the SST k-ω turbulence model and includes the energy equation for temperature analysis. The transient simulation examines density variations, pressure distributions, temperature changes, and velocity profiles within the piston chamber.

Price: $64

This project investigates turbocharger performance using CFD analysis in ANSYS Fluent, focusing on the fluid flow and thermal behavior of air through a one-sixth periodic sector of the geometry. The geometry was prepared using Vista CCD and BladeGen, and the mesh was generated with TurboGrid as a structured grid containing 972,176 cells. A pressure-based solver with the SST k-ω, k-ω turbulence model was used, and blade rotation was simulated at 92,000 RPM with the Frame Motion approach. The results highlight the influence of geometry on flow patterns, pressure distribution, and temperature gradients, offering insight into compression efficiency and overall turbocharger performance.

Price: $63

In this project, generation of sound by displacing of speaker diaphragm is modeled using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 687,500 elements was generated using ANSYS Meshing. Dynamic mesh used to model the movement of diaphragm during simulation. In this project we are going to analyze and see how a speaker can generate a specific sound wave.

Price: $16

The present problem simulates a Six Blade Stirring Mixer using ANSYS Fluent software. We have designed the geometry using DesignModeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is unstructured with 5,447,852 cells. The Mixture multiphase model has been used to simulate the present model. The Multiple Reference Frames (MRF) model is used to simulate the motion of impeller. The solution is steady, and the k-Ꜫ model is chosen to simulate the turbulence of the flow.