Price: $16

The geometry of geothermal was drawn at SpaceClaim. the model was imported into ANSYS Meshing for mesh generation This project employs CFD software to simulate a geothermal system and analyze fluid behavior. The fractured reservoir is a porous zone with porosity of 0.047.

Price: $180

This product presents Solar Chimney Optimization using ANSYS software. We model with the Design Modeler software; we mesh with ANSYS Meshing software. We use the Design Exploration tool to perform the optimization process. We use the Optimal Space-Filling Design in the Design of Experiment (DOE). We use the Genetic Aggregation and the Response Surface Methodology (RSM).

Price: $54

In this product, we conducted a comprehensive study comparing two distinct cases1) A conventional PV panel without pCM 2) An enhanced system incorporating PCM cooling technology comprehensive three-dimensional model was developed using ANSYS SpaceClaim,The computational domain was discretized using ANSYS Meshing software, employing a structured grid approach with approximately 1,000,000 elements The Solidification and Melting model was activated to accurately capture the phase change dynamics of the PCM The Discrete Ordinates (DO) radiation model was implemented to account for radiative heat transfer Solar Ray Tracing was enabled for precise solar load calculations

Price: $60

this report presents a FSI analysis of a HAWT using CFD. The geometry was created using ANSYS Design Modeler, and meshing was performed with ANSYS Meshing, resulting in a high-fidelity model with 3,465,821 cells. The simulation leverages (MRF) approach for rotating domains and dynamic mesh methods to capture the complex fluid-structure interactions. A two-way FSI approach was employed to capture the mutual interaction between the fluid flow and the structural deformation of the turbine blades.

Price: $40

we are simulating the solar panel that is floated on the water surface,The simulation is 3D and the solar panels and performed by ANSYS Fluent. The geometry is designed using Spaceclaim software. Then, it is meshed in ANSYS Meshing. In total 479895 cells are generated. phases are modeled by Volume of Fluid multiphase model. The dynamic mesh can reproduce elements by remeshing and smoothing types. Also, the radiation is activated.

Price: $30

The problem numerically simulates the Fluid-Structure Interaction over Vertical Turbine using ANSYS Fluent software. We designed the 3-D model using the Design Modeler software. The mesh grid is generated using ANSYS Meshing, and the element number equals 705,465. The Frame Motion method is used to rotate the turbine. FSI model analyses total strain, and stress over the VAWT turbine.

Price: $14

This study investigates the airflow dynamics of a 2D wind turbine using CFD analysis in ANSYS Fluent. The 2D geometry was created in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a tetrahedral mesh of 60,912 elements. The simulation utilizes a dynamic mesh feature with remeshing and smoothing methods, coupled with a Six DOF (Degree of Freedom) model for turbine rotation. A transient, pressure-based solver captures time-dependent flow characteristics. The simulation examines airflow patterns, velocity distributions, and turbine performance over multiple time steps, visualized through velocity magnitude contours.

Price: $64

This project simulates an Archimedes Spiral Wind Turbine in ANSYS Fluent software. The geometry is designed in Solid works then meshed in ANSYS Meshing with 3,207,809 unstructured cells. The rotation of the blade is simulated via Mesh Motion. The turbulence of the air flow is modeled with SST k-w model.

Price: $64

In this project, a Gorlov vertical axis wind turbine is simulated using ANSYS Fluent software. The geometry is re-designed in ANSYS Spaceclaim software and meshed in ANSYS Meshing software. The angular motion is simulated using the sliding mesh (mesh motion) model.