MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
Price: $20
The current CFD Analysis simulates the flow around a cylinder to investigate its aeroacoustics condition. The simulation is dependent on time so is performed in transient form. The Ffwocs Williams & Hawkings Acoustic Model has been used for acoustic modeling.
Price: $20
The current CFD Analysis simulates the flow around a cylinder to investigate its aeroacoustics condition. The simulation is dependent on time so is performed in transient form. The Broadband Noise Sources Acoustic Model has been used for acoustic modeling.
Screw pump CFD Simulation, ANSYS Fluent Training
Intermediate
Price: $14
The problem numerically simulates the Screw Pump using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 3,886,425. The simulation is performed as unsteady (Transient). We use the Volume of Fluid (VOF) model to define the different phases of the solution. The Mesh Motion option is used to model the rotational movement of the pump.
Surface injection using DPM CFD Simulation
Beginner, Intermediate
Price: $16
The problem numerically simulates the Surface Injection using ANSYS Fluent software. We design the 3-D model by the Design Modeler and mesh the model with ANSYS ICEM software. The mesh type is Structured, and the element number equals 92,809. We perform this simulation as unsteady (Transient). The Discrete Phase Model (DPM) model defines the particle's movement.
Jet Combustion CFD Simulation by ANSYS Fluent
Beginner, Intermediate
Price: $28
The problem numerically simulates the Combustion Jet inside a chamber using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 9,928. We use the Species Transport model to define the combustion process.
Pollution of the Street between Buildings CFD Simulation
Beginner, Intermediate
Price: $20
The problem numerically simulates the Pollution of the Street between Buildings using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 274,496. The Species Transport model is used to simulate the pollutant.
Price: $28
The problem numerically simulates the HPBT Bullet movement after firing using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. The Mesh is modeled by ANSYS Meshing software, and the element number equals 13,040. We perform this simulation as unsteady (Transient). The Dynamic Mesh method is used to simulate the movement process.
Labyrinth spillway CFD Simulation
Beginner, Intermediate
Price: $42
The problem numerically simulates the Labyrinth spillway using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the Polyhedra element number equals 99,248. The VOF Multiphase model is selected to define water and air in channels.
Price: $10
The problem numerically simulates the Mixing Tank with Helical Impeller using ANSYS Fluent software. We design the 3-D model by the Design Modeler and create the mesh using ANSYS Meshing software. The mesh type is Polyhedra, and the element number equals 296,106. We perform this simulation as unsteady (Transient). The Mesh Motion option is enabled to define the rotational motion of the impeller.