Academic Online Courses
Here's every CFD online course related to Academic category.
Price: Free
The problem numerically simulates the Container Effect on Truck aerodynamics using ANSYS Fluent software. The 3-D geometry is designed in Solidworks and Design Modeler software. We used ANSYS Meshing to generate polyhedral mesh; the element number equals 663,127 and 1,095,371 for 'truck' and 'truck and container,' respectively. Turbulence is modeled with the k-w SST model.
Price: $12
This project presents a CFD simulation of airflow over an airfoil using ANSYS Fluent. The computational mesh was refined near the airfoil to capture boundary layer effects, and the k–ω SST turbulence model was applied for accurate prediction of lift and drag. The results highlight the pressure distribution, velocity field, and aerodynamic performance of the airfoil.
Stall Investigation Over a Wing, ANSYS Fluent CFD Simulation Training
Beginner, Intermediate
Price: $220
The problem numerically simulates the Stall phenomenon over a Wing using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The air is assumed to be incompressible.
Price: $100
The problem numerically simulates Spoiler Modes Comparison for F1 Car Aerodynamics using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the polyhedral element number equals 450000. We aim to compare the open and close modes of the spoiler and observe the difference between the lift and drag forces.
Wind Turbine Considering Turbine Base 3-D Simulation
Intermediate
Price: $160
The problem numerically simulates a horizontal axis wind turbine using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1981472. We use the Frame Motion (MRF) to define a rotational movement.
Price: $80
The problem numerically simulates the Venturi Flow in a Tube for Air Suction using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ICEM software. The mesh type is Structured, and the element number equals 193932. The simulation is dependent on time so is performed in a transient form. We use the VOF Multiphase model to define a two-phase flow.
Impinging Jet on a U-Shaped Plate, Heat Transfer, ANSYS Fluent Training
Beginner, Intermediate
Price: Free
In this simulation, the airflow hits the U-shaped wall in the form of an impinging jet to study the Nusselt number in different Reynolds numbers.
Combustion Chamber Performance Optimization: DOE Applying CCD
Intermediate, Advanced
Price: $27
In this project, combustion chamber performance is optimized using DOE and RSM.
Aircraft Propeller CFD Simulation Using Mesh Motion, ANSYS Fluent Training
Beginner, Intermediate
Price: $20
The problem numerically simulates the Aircraft Propeller using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 692023 and 3812519. We perform this simulation as unsteady (Transient). We use the Mesh Motion model to define the rotational movement. We study aerodynamic forces, including drag and lift.