Academic Online Courses
Here's every CFD online course related to Academic category.
Price: $360
The problem numerically simulates the Nanofluid optimum concentration and Heat Transfer enhancement using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 40000. This project is validated with a reference article. The Energy Equation is activated to consider heat transfer.
Price: $140
In this research, using species transport module, the gases from combustion in the car engine and their interaction with the open air in the urban environment were investigated statically and in traffic mode.
Solar Shading Double Glazing façade, Radiation
Intermediate
Price: $24
The present problem simulates the radiation of solar rays into the room's interior considering the effects of a wooden partition as a solar shading, and a double glazing glass of façade, using ANSYS Fluent software.
Price: $20
In this project, to investigate conjugated heat transfer, the heat exchanger of shell and tube with metal baffles was modeled.
Nanofluid Flow Heat Transfer in a Wave Sine Channel
Intermediate
Price: $63
The present problem simulates the wave motion of a nanofluid within a sinusoidal channel using ANSYS Fluent software.
Gas Flare, 2-step Air-Methane Mechanism Combustion, ANSYS Fluent Tutorial
Intermediate, Advanced
Price: $28
The problem numerically simulates a two-step combustion mechanism in a gas flare using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1546925. We use the Species Transport model to define chemical species. The Volumetric option is selected to define chemical Reactions between reactants and products.
Helical Blade Wind Turbine: 5 different RPMs
Beginner, Intermediate, Advanced
Price: $220
This project uses ANSYS Fluent to numerically simulate a helical-blade vertical axis wind turbine. The project investigates the tip speed ratio (TSR) across different blade rotational speeds. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with a polyhedral element count of 507,457. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational motion in a distinct zone around the blades.
Price: $16
The problem numerically simulates Server Room Cooling with 6 Cabinets using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 448000. The Energy Equation is activated, and a Heat Source is applied to the room.
Radiator with Aluminum Fin and U-Shaped Tube (CHT)
Intermediate
Price: $8
The present problem simulates the performance of a radiator using ANSYS Fluent software.