Agricultural & Food Online Courses

Price: $64

The problem numerically simulates the fluidized bed bio-reactor using ANSYS Fluent software. The geometry is designed in a 2D model with the ANSYS Design Modeler software. We performed the structured mesh of the model with ANSYS Meshing software, and the element number equals 26,289. The Eulerian model was used to simulate the multiphase behavior of the solution. The project is solved in transient state.

Price: $42

The problem numerically simulates the Labyrinth spillway using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the Polyhedra element number equals 99,248. The VOF Multiphase model is selected to define water and air in channels.

Price: $240

In this project, an industrial Greenhouse has been numerically simulated by ANSYS Fluent. Studying relative humidity, airflow velocity and thermal condition. Removing Ammonia as a pollutant. Greenhouse design improvement. HVAC analysis.

Price: $390

This project involves the simulation of air and biomass combustion in a Circulating Fluidized Bed (CBF) using CFD techniques. The primary objectives are to examine the combustion characteristics of Probability Density Function (PDF) for biomass combustion simulation. The CFB is defined with specific boundary conditions, and simulations are performed using a steady-state for fluid flow, unsteady for DPM, and incompressible flow model. The turbulent flow within the CFB is modeled using the realizable k-e turbulent model and thermal radiation is simulated with the P1 model. The simulation incorporates the single rate model for devolatilization of biomass and the intrinsic model for particle combustion.

Price: $72

Seed drying has been simulated. Species Transport & Porous model is employed. An unstructured mesh grid is carried out. Considering Hydraulic mechanism (Evaporation is ignored).

Price: $36

The problem numerically simulates the Greenhouse Air Ventilation using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 216456. We perform this simulation as unsteady (Transient). We use the DO Radiation and Convection method for heat transfer.

Price: $240

In this project, a revolving rice dryer using one-way DPM has been simulated and the results of this simulation have been investigated.

Price: $48

In this project, a Packed Bed Reactor with Particles has been simulated, and the results of this simulation have been investigated.

Price: $80

In this project, a Rice drying device using two-way DPM has been simulated and the results of this simulation have been investigated.