Chemical Online Courses

Price: $12

The problem numerically simulates a mixing pipe, baffle configuration effect on mixing in ANSYS Fluent software. The 3D geometry of the model is created in SpaceClaim software. The model is meshed in ANSYS Meshing creating structural mesh with 1,330,000 , 1,380,000 and 1,500,000 elements for the different cases. The K-ω SST model is used to describe turbulence of the flow.

Price: $42

This report presents a simulation of the mixing of water and iron powder in a cylindrical tank with a rotating impeller using the Eulerian multiphase method. The geometry of the mixing tank was created using ANSYS SpaceClaim software. A high-quality mesh of about 1,260,000 tetrahedron elements was generated using ANSYS Meshing software. Appropriate Eulerian interphase forces and settings were applied and the Moving Reference Frame (MRF) method was used.

Price: $569

The problem numerically simulates a Radial Fuel Cell using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 2,393,706. We use the Fuel Cell and Electrolysis Model to define a fuel cell. We used the PEMFC sub-model to define a proton exchange membrane fuel cell. We used the Species model to define H2, O2, and H2O.

Price: $629

The problem numerically simulates the Electrolysis using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 2,393,706. We use the Fuel Cell and Electrolysis Model and the Electrolysis sub-model. We used the Species model to define H2, O2, and H2O.

Price: $80

In this project, a solid fuel ramjet (SFRJ) engine has been numerically simulated by ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 35,224. We use the Species Transport model to define the combustion process.

Price: $629

The problem numerically simulates Fuel Cell with Cooling System using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 4,984,882. We use the Fuel Cell and Electrolysis Model to define a fuel cell. We used the SOFC sub-model to define a solid oxide fuel cell. We used the Species model to define H2, O2, and H2O.

Price: $60

In this project, we have simulated the Thermoacoustics Analysis in Combustion Chamber using ANSYS Fluent software. Three-dimensional modeling was done using SpaceClaim software. The meshing of the model has been done using ANSYS Meshing software. The Non-Adiabatic Non-Premixed Combustion model models the combustion. The acoustic is modeled via the Broadband Noise Source model.

Price: $20

In this project, we have simulated the performance of a Porous Media Reactor Tube with the presence of catalyst using ANSYS Fluent software. Three-dimensional modeling was done using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number equals 4,255,042 . To simulate the behavior of molten salt and reactor inlet flow, the multiphase VOF Eulerian model is utilized. The porous media model is employed to impact the flow inside the reactor. For the reactions, the species transport model with two reactions is used.

Price: $140

In this project, we have simulated the performance of a Mist Eliminator using ANSYS Fluent software. Three-dimensional modeling was done using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number equals 2,062,734. The Discrete Phase Model (DPM) is used to model water-liquid particles in transient mode. The Realizable K-epsilon model is selected for turbulence characteristics of fluid flow.