Chemical Online Courses
Here's every CFD online course related to Chemical category.
Spray CFD Simulation using Injection in DPM
Intermediate
Price: $20
The problem numerically simulates the process of water spray into a cubic space using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 25464. We perform this simulation as unsteady (Transient). We use the Discrete Phase Model (DPM) model to define a spray process.
Price: $240
The problem numerically simulates the surface evaporation of a falling water droplet using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 94800. We perform this simulation as unsteady (Transient). We use the Mixture Multi-Phase Model to define droplets inside the air. We use a UDF to define surface evaporation as the Mass Transfer rate between water and air.
Bluff-Body Mild Burner CFD Simulation
Intermediate
Price: $66
This project is the CFD simulation of combustion in a bluff body mild burner.
Price: $16
The present problem is concerned with the simulation of a spiral heat exchanger.
Price: $16
The problem numerically simulates Reverse Cross Flow Plate Heat Exchanger using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 155000. Ethylene Glycon is used as an operating fluid whose properties are defined as temperature-dependent polynomials.
Price: $16
The problem numerically simulates Chevron Plate Heat Exchanger using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 638892. The Energy equation is activated to consider heat transfer in the heat exchanger.
Heat Exchanger with Baffle Cut and Mixture Nano Fluid
Beginner, Intermediate
Price: $28
A Shell and tube heat exchanger applying a Nanofluid is simulated by ANSYS Fluent software. 3-D Geometry is designed by Design Modeler software. The Heat exchanger was designed with a volume of 450,980 elements by ANSYS Meshing software. In order to model the Nano Fluid, a multi-phase model using the Mixture method was used.
Shell and Tube Heat Exchanger, Helical Fin, NanoFluid
Beginner, Intermediate
Price: $28
In this project, we simulate a Shell & Tube Heat Exchanger with Helical Fin considering NanoFluid, by ANSYS Fluent software. The 3-D geometry of shell and tube heat exchanger considering a helical tape is designed and meshed by Design modeler and ANSYS Meshing software, respectively. The nano-fluid is modeled by applying multiphase flow (Mixture method).
PCM in Shell and Tube Finned Heat Exchanger CFD Simulation
Beginner, Intermediate
Price: $24
Performance of Phase Change Material (PCM) inside a shell and tube-finned heat exchanger by ANSYS Fluent software. The current model is designed in three dimensions using Design Modeler software. The meshing of the present model has been done using ANSYS Meshing software. The mesh type is structured, and the element number is 2989887. The phase change material is paraffin, so the solidification and melting model has been used. The simulation is Unsteady in terms of time.