Chemical Online Courses
Here's every CFD online course related to Chemical category.
Price: $8
In this project, the heat transfer fluid flow inside the shell and tube heat exchanger with fins on the flat shell as vortex generators was simulated by ANSYS Fluent software.
Price: $60
The problem numerically simulates the combustion of methane and air in a combustion chamber using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 384112. We use the Species Transport model to define a chemical reaction. We use the Discrete Ordinate (DO) to define the Radiation model.
Catalytic Reactor CFD Simulation by Eulerian Multiphase Flow, ANSYS Fluent Tutorial
Intermediate, Advanced
Price: $48
The problem numerically simulates the Catalytic Reactor using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 430586. We use the Eulerian Multi-Phase model to define three phases, including air, fuel and catalyst material.
Price: $54
This simulation is based on the information of a reference article "Modeling of forced convective heat transfer of a non-Newtonian nanofluid in the horizontal tube under constant heat flux with computational fluid dynamics" and its results are compared and validated with the results in the article.
Price: $80
The problem numerically simulates the Double Pipe Counter Flow Heat Exchanger using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 115635. The Energy Equation is activated to consider heat transfer.
Price: $8
The present problem is to simulate a heat exchanger using ANSYS Fluent software.
Nanofluid Porous Mixer for Increasing Heat Transfer
Beginner, Intermediate
Price: $40
The problem numerically simulates the Porous Mixer for Increasing the Heat Transfer of Nanofluid using ANSYS Fluent software. We design the 3-D model by the Spaceclaim software, and then mesh the model by ANSYS Meshing software. The Nanofluid is modeled as a single-phase fluid with modified thermophysical properties. We use the Porous option in the cell zone conditions.
FCC Riser Gas-Solid Separation System Simulation
Intermediate
Price: $48
The present problem simulates gas-solid flow within a fluid catalytic cracking (FCC) system using ANSYS Fluent software.
Price: $80
The problem numerically simulates Planar Heat Exchanger with Mixing Tabs using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 4017548. The Energy Equation is activated to consider heat transfer in the heat exchanger.