Chemical Online Courses
Here's every CFD online course related to Chemical category.
Price: $20
The problem numerically simulates the Plasma Gasification Reactor using ANSYS Fluent software. The plasma gasification process is ignored. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 8711.
PCM in Triplex Tube Internal-External Fin, Paper Validation
Beginner, Intermediate
Price: $63
The problem numerically simulates the PCM Melting in Triplex Tube with Internal–External Fins using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 17856. We perform this simulation as unsteady (Transient). We define the Solidification and Melting model to define phase change material. This simulation is validated with a reference article.
Explosion and Pollutant Dispersion of Oil Storage Tank
Intermediate, Advanced
Price: $32
The problem numerically simulates the effects of the oil tank detonation process in an urban area and the pollutant emission using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 1746979. We use the Species Transport model to define CO2, SO2, NO2, CO, H2O, C, and air.
Price: $48
The problem numerically simulates a Gas-Liquid Separator using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 356230. We use the VOF Multi-phase model to define Hydrogen-sulfide and Oil in the chamber.
Non-Newtonian Fluid Flow Between Two Moving Eccentric Cylinders
Beginner, Intermediate
Price: $32
The problem numerically simulates the non-newtonian fluid flow inside Two Moving Eccentric Cylinders using ANSYS Fluent software. We design the 3-D model with the Gambit software. The mesh type is structured, and the element number equals 179,820. low-Re correction is activated to capture the flow patterns The Eulerian Model is used for simulating multiphase behavior. The fluid type is set as Non-Newtonian. The inner cylinder will start to rotate by applying the Moving Wall option.
Price: $80
The problem numerically simulates heat transfer inside a Finned Tube heat exchanger using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the element number equals 890710. The Energy Equation is activated to consider heat transfer.
Price: $8
This project investigates the heat transfer inside a helical heat exchanger.
Mixing of Carbon Dioxide and Ethanol CFD Simulation
Beginner, Intermediate
Price: $180
The problem numerically simulates the Mixing of Carbon Dioxide and Ethanol using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 73788. We perform this simulation as unsteady (Transient). We use the VOF Multi-Phase model to define carbon dioxide and ethanol. We use a UDF to define time-dependent pressure at the model's inlet.
Air Gap Membrane Distillation (AGMD), Paper Numerical Validation, ANSYS Fluent Training
Intermediate, Advanced
Price: $360
The problem numerically simulates the Air Gap Membrane Distillation (AGMD) using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 344400. We define porous medium and heat sources in cell zone conditions. This simulation is validated with a reference article.