Chemical Online Courses
Here's every CFD online course related to Chemical category.
Price: $10
In this project, the flow inside a coil is modeled using ANSYS Fluent software. The geometry was created in Design Modeler, and a mesh consisting of 4,824,847 elements was generated using ANSYS Meshing. In this project we are going to find the outlet temperature and calculate the static pressure and static temperature throughout the domain.
Methane Combustion in a Gas Stove CFD Simulation, ANSYS Fluent
Beginner, Intermediate
Price: $28
In this project, the combustion of methane in a gas stove was modeled using ANSYS Fluent. Methane mechanism was chosen for reaction mechanism and eddy dissipation model used for turbulence-chemistry. The geometry was created in Design Modeler, and a mesh consisting of 5,533,297 elements was generated using Fluent Meshing.
Price: $200
In this project, the combustion of kerosene in a model gas turbine combustor, with all its complexities, was modeled using ANSYS Fluent. Soot formation in the combustion process was modeled with the Moss-Brooks model by selecting "C2H2" and "C2H4" species as precursors for surface growth, and the Lee model for oxidation. The geometry was created in SpaceClaim, and a mesh consisting of 51,427 elements was generated using ANSYS Meshing. The rates of nucleation, surface growth, coagulation, and oxidation, as well as the soot mass fraction and temperature in the combustor, were investigated in this study.
Price: $12
This project simulates a Packed Bed with catalyst Particles, modeled as heat source in ANSYS Fluent. The geometry is designed in Design modeler then meshed in ANSYS Meshing with 252,565 polyhedral cells. RNG k-ε model is activated as turbulence model. The radiation is taken into account in heat transfer with DO model.
Price: $240
In this project, a Circulating Fluidized Bed(CFB) Boiler is simulated using ANSYS Fluent software. The 3-D geometry is designed in spaceclaim then meshed in ANSYS Meshing producing 437,472 unstructured cells. The species transport including volumetric reactions, is taken into account for modeling combustion. The DPM model is used to model the particles.
Price: $48
⦁ This problem simulates Bubble Columns Reactor using the VOF model in Ansys Fluent software. ⦁ The 2-D geometry is designed in Design Modeler software. ⦁ ANSYS Meshing software is used to generate the mesh; the element number equals 93,687. ⦁ In this project, the rising of air bubbles is simulated using the VOF model.
Price: $60
In this project, liquid fuel combustion is simulated using DPM module. The geometry was designed in SpaceClaim, and a mesh with 769000 elements was generated using ANSYS Meshing. The species transport module is employed. The fuel is ethanol and the oxidizer is nitrous oxide.
Price: $64
The problem numerically simulates a Pool Boiling unsteadily using ANSYS Fluent software. We design the model in Spaceclaim and then meshed it with ANSYS Meshing software generating 92,151 cells. The multi-phase Eulerian method is used for simulating the liquid phase of water and the vapor phase of bubbles The k-ɛ realizable model is performed to simulate turbulent behavior of the bubble.
Turbulent Asymmetric Vortex Flame CFD Simulation, Paper Numerical Validation
Intermediate, Advanced
Price: $32
The current CFD Analysis numerically Validates the Paper "Computational and experimental investigations of turbulent asymmetric vortex flames" via ANSYS Fluent software. We have designed and meshed the geometry using GAMBIT®, producing unstructured 375,534 cells. The Species Transport model is used to simulate the reaction. The turbulent flow is simulated using these turbulence models: RNG k-epsilon, Realizable k-epsilon, Standard k-epsilon, k-omega, Spalart Almaras and Reynolds stress.