Chemical Online Courses

Price: $240

This study investigates bubble dynamics in a 2D boiling chamber using CFD analysis in ANSYS Fluent. The 2D geometry was created in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a structured mesh. The simulation utilizes the Volume of Fluid (VOF) multiphase model coupled with an evaporation-condensation model for phase change. A User-Defined Function (UDF) initializes a sinusoidal air layer at the chamber bottom. The transient simulation examines bubble formation, growth, rise, and detachment over multiple time steps, visualized through volume fraction contours.

Price: $14

This study examines CH4 and H2 mixing in T-junction and Y-junction configurations using CFD analysis in ANSYS Fluent. The geometry was created in ANSYS Design Modeler and meshed with ANSYS Meshing, resulting in a high-quality mesh of 2,484,831 quadrilateral elements. The simulation utilizes the Standard k-ε turbulence model and Species Transport model for mixing. An isothermal mixing process is considered without chemical reactions. The analysis compares mixing efficiency, velocity profiles, pressure distributions, and species concentrations between T-junction and Y-junction designs.

Price: $330

This project investigates the combustion process in a cylindrical chamber with a porous medium using CFD analysis in ANSYS Fluent. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a high-quality mesh with 815,135 elements. The simulation employs the RNG k-ε turbulence model, Discrete Ordinate (DO) radiation model, and Species Transport model with Volumetric Reactions. Additional submodels for NOx and Soot formation are included. A cylindrical porous zone with 0.5 fluid porosity is incorporated near the inlet. The study demonstrates the impact of the porous medium on flow patterns, temperature distribution, species concentrations, and pollutant formation.

Price: $24

This project investigates the performance of a tube with twisted tape inserts and vortex generators in ANSYS Fluent. The study focuses on the cooling of hot alumina nanofluid flowing through the inner tube while exposed to external air flow. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing. The simulation uses a pressure-based solver with the RNG k-ε turbulence model and enabled energy equation for steady-state conditions. The study demonstrates the impact of twisted tape inserts and vortex generators on flow patterns, providing insights into heat transfer enhancement and cooling efficiency.

Price: $20

In this project, the explosion of TNT, with all its complexities, was modeled using ANSYS Fluent. Explosion starts with a fast decomposition reaction that increase the temperature and pressure suddenly that follow by a series of pressure waves. The geometry was created in SpaceClaim, and a mesh consisting of 2,673,750. elements was generated using ANSYS Meshing. The animation of pressure in domain presented and compression wave speed is calculated.

Price: $16

This project numerically simulates the Bubble Trap using ANSYS Fluent software. The 2-D geometry is designed in Spaceclaim software. We used ANSYS Meshing Software to generate mesh; the element number equals 32,000 . The multiphase VoF model simulates the two-phase flow of water and air.

Price: $16

The present problem simulates a Six Blade Stirring Mixer using ANSYS Fluent software. We have designed the geometry using DesignModeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is unstructured with 5,447,852 cells. The Mixture multiphase model has been used to simulate the present model. The Multiple Reference Frames (MRF) model is used to simulate the motion of impeller. The solution is steady, and the k-Ꜫ model is chosen to simulate the turbulence of the flow.

Price: $160

In this project, fire of a fuel tank caused by fuel leakage is modeled using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 1,262,049 elements was generated using ANSYS Meshing. The effect of blowing wind on the temperature of the room 10m away from this tank is investigated.

Price: $140

The problem numerically simulates Evaluation of NO and Soot Emissions from Wood Gas Flare using ANSYS Fluent software. We design the 3-D model with the SpaceClaim software. We Mesh the model with ANSYS Meshing software, and the element number equals 2.8 millions. Energy and species transport models were enabled to account for heat transfer and chemical reactions.