For Professionals Online Courses
Here's every CFD online course related to For Professionals category.
Price: $499
In this project, we perform the numerical simulation of a PEM Fuel Cell Stack System using ANSYS Fluent software. We designed the geometry of the model in 3D using Design Modeler software. We meshed the model using ANSYS Meshing software, and 9,946,409 cells have been generated. We used the Fuel Cell and Electrolysis model and the PEMFC submodel to define the proton-exchange membrane fuel cell. We applied the Stack Management option to define multiple fuel cell units. The Species Transport model is automatically activated because of using the fuel cell model.
Price: $629
The problem numerically simulates Fuel Cell with Cooling System using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 4,984,882. We use the Fuel Cell and Electrolysis Model to define a fuel cell. We used the SOFC sub-model to define a solid oxide fuel cell. We used the Species model to define H2, O2, and H2O.
User-Defined Function (UDF) Concepts in ANSYS Fluent
Beginner, Intermediate, Advanced
Price: Free
Introduction to USer-Defined Function (UDF) in ANSYS Fluent software Introduction to UDF running methods Introduction to Mesh Terminology Introduction to Model-Specific Macros category Introduction to General Purpose Macros category Introduction to Multiphase Macros category Introduction to Discrete Phase Model (DPM) Macros category Introduction to Dynamic Mesh Macros category Introduction to Additional Macros category
Property Macro, UDF, Viscosity Relation CFD Simulation
Intermediate, Advanced
Price: $24
The problem numerically simulates the water viscosity exchange based on temperature using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh is Structured, and the element number equals 133,400. We use the User-Defined Function (UDF) to define a viscosity relation. We use the Property Macro for UDF.
Profile Macro, UDF, Pressure Profile CFD Simulation
Intermediate, Advanced
Price: $24
The problem numerically simulates the air pressure profile in an urban area using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh is Structured, and the element number equals 118,400. We use the User-Defined Function (UDF) to define a pressure profile. We use the Profile Macro for UDF.
Prandtl-K Macro, UDF, Prandtl number CFD Simulation
Intermediate, Advanced
Price: $18
The problem numerically simulates the turbulence model using ANSYS Fluent software. We design the 2-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 97,972. We use the User-Defined Function (UDF) to define the Prandtl number. We use the Prandtl_K Macro for UDF.
Init Macro, UDF, Initial Temperature CFD Simulation
Intermediate, Advanced
Price: $180
The problem numerically simulates the double-pipe heat exchanger using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh is Structured, and the element number equals 147,200. We use the User-Defined Function (UDF) to define an initial temperature. We use the INIT Macro for UDF.
CG-Motion Macro, UDF, Reciprocating Motion CFD Simulation
Intermediate, Advanced
Price: $30
The problem numerically simulates the moving object using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 143,423. We performed the simulation in an unsteady (Transient) state. We use the Dynamic Mesh model to define the moving object. We use the User-Defined Function (UDF) to define a transitional reciprocating motion. We use the CG-MOTION Macro for UDF.
Source Macro, UDF, Momentum Source Term CFD Simulation
Intermediate, Advanced
Price: $30
The problem numerically simulates the porous medium with momentum source term using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh is Structured, and the element number equals 256,000. We use the User-Defined Function (UDF) to define a pressure profile. We use the Source Macro for UDF.