For Professionals Online Courses
Here's every CFD online course related to For Professionals category.
Floating Vessel Motion in Water by Dynamic Mesh, ANSYS Fluent Training
Intermediate, Advanced
Price: $60
The problem numerically simulates the Floating Vessel Motion in Water using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 902808. We perform this simulation as unsteady (Transient). We use the Dynamic Mesh model to define the instantaneous change of meshing. We use a UDF to define the motion with two degrees of freedom. We use the VOF Multiphase model and the Open Channel condition to define the water level inside the air.
Non-Newtonian Fluid Flow Between Two Moving Eccentric Cylinders
Beginner, Intermediate
Price: $32
The problem numerically simulates the non-newtonian fluid flow inside Two Moving Eccentric Cylinders using ANSYS Fluent software. We design the 3-D model with the Gambit software. The mesh type is structured, and the element number equals 179,820. low-Re correction is activated to capture the flow patterns The Eulerian Model is used for simulating multiphase behavior. The fluid type is set as Non-Newtonian. The inner cylinder will start to rotate by applying the Moving Wall option.
Mixing of Carbon Dioxide and Ethanol CFD Simulation
Beginner, Intermediate
Price: $180
The problem numerically simulates the Mixing of Carbon Dioxide and Ethanol using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 73788. We perform this simulation as unsteady (Transient). We use the VOF Multi-Phase model to define carbon dioxide and ethanol. We use a UDF to define time-dependent pressure at the model's inlet.
Radiator Thermal Performance with Fans, Paper Validation
Intermediate, Advanced
Price: $126
The problem numerically simulates Radiator Thermal Performance with Fans using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the element number equals 4683472. This project is simulated and validated with a reference article. We use the Fan boundary condition and define a Pressure Jump. We use a UDF to define the temperature profile.
Price: $330
This problem simulates the HVAC of an operating room by ANSYS Fluent software. The geometry of the present model is drawn by Design Modeler software and then meshed by ANSYS Meshing software. It's a Structured mesh, and the cell number equals 938174. The VOF multiphase model is used for three phases: air, water vapor, and water fluid. Mass Transfer is applied to simulate Evaporation/Condensation. Also, a UDF file is used to determine the Surface Evaporation.
Price: $210
In this project, the heat conduction of a brake disk system is modeled and simulated.
UAV External Airflow CFD Simulation, ANSYS Fluent Tutorial
Beginner, Intermediate, Advanced
Price: Free
The problem numerically simulates the airflow around a drone (UAV External Airflow) using ANSYS Fluent software. We design the 3-D model by the CATIA software. We mesh the model with Gambit software, and the element number equals 3079338.
COVID-19 Transient Breathing in the Operating Room
Intermediate
Price: $120
The problem numerically simulates COVID-19 Patient TRANSIENT Breathing in Operating Room using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 4354238. We perform this simulation as unsteady (Transient). We use the Species Transport Model to define oxygen, carbon dioxide, etc, for air conditioning applications. We use the Discrete Phase Model (DPM) to define particle injection from the patient's mouth. We use the UDF to define breathing flow rate.
Price: $30
The problem numerically simulates seawater flow around offshore pipelines using ANSYS Fluent software. We aim to investigate Drag and Lift in Two comparative cases. We design the 2-D model by the ICEM software. We Mesh the model by ICEM software. This mesh is Structured, and the element number equals 135417. We use two UDF to define wavy flow velocity and relative pressure due to wave motion. We perform this simulation as unsteady (Transient).