For Professionals Online Courses

Here's every CFD online course related to For Professionals category.

242 Courses

Price: $219

This study aims to investigate the aerodynamic performance of a Grumman RQ-4 Global Hawk using ANSYS Fluent. The Global Hawk geometry was modelled using SpaceClaim then imported into ANSYS Fluent for meshing consisting 3,764,695 elements. The simulation used a pressure-based solver.

Play

Price: $48

This study investigates the performance of a spiral magnetic separator using ANSYS Fluent. The geometry, representing a spiral-shaped separator with multiple turns, is designed in ANSYS SpaceClaim and meshed using ANSYS Meshing. The simulation is conducted as a steady-state analysis with a pressure-based solver. The Realizable k-epsilon turbulence model is employed, along with a two-way coupled Discrete Phase Model (DPM) for particle simulation. The Magnetic Induction MHD Method is enabled to model the applied magnetic field, with User-Defined Functions (UDFs) implemented for magnetic field components. Results reveal complex interactions between fluid flow, magnetic particles, and the applied magnetic field, demonstrating the separator’s effectiveness in particle segregation.

Play

Price: $240

This study investigates bubble dynamics in a 2D boiling chamber using CFD analysis in ANSYS Fluent. The 2D geometry was created in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a structured mesh. The simulation utilizes the Volume of Fluid (VOF) multiphase model coupled with an evaporation-condensation model for phase change. A User-Defined Function (UDF) initializes a sinusoidal air layer at the chamber bottom. The transient simulation examines bubble formation, growth, rise, and detachment over multiple time steps, visualized through volume fraction contours.

Play

Price: $12

This study investigates the flow dynamics of air and water in a 2D piston chamber using CFD analysis in ANSYS Fluent. The geometry was created in ANSYS Design Modeler and meshed using ANSYS Meshing. Six DOF Dynamic Mesh technique employed to accommodate piston movement. The simulation utilizes the SST k-ω turbulence model and includes the energy equation for temperature analysis. The transient simulation examines density variations, pressure distributions, temperature changes, and velocity profiles within the piston chamber.

Play

Price: $63

In this project, generation of sound by displacing of speaker diaphragm is modeled using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 687,500 elements was generated using ANSYS Meshing. Dynamic mesh used to model the movement of diaphragm during simulation. In this project we are going to analyze and see how a speaker can generate a specific sound wave.

Play

Price: $72

The problem numerically simulates Arterial Stent using ANSYS Fluent software. We design the 3-D model by the Spaceclaim software. We Mesh the model by ANSYS Meshing software, and the element number equals 220,000 and 250,000 for the Stenosis and stented artery respectively . We use a UDF to define pulsatile blood flow. The Eulerian multiphase model was enabled to distinguish between the blood and arterial wall interfaces.

Play

Price: $30

In this project, the electrical current caused by the electrical potential is modeled using ANSYS Fluent. Also, the magnetic field created by the electrical current and its body force is simulated. Three User-Defined Scalars (UDS) are added for calculating the electrical and magnetic properties, and five User-Defined Functions (UDF) are used for the computation of the magnetic equations' source terms, heat release from the electric field, and momentum body forces. The geometry was created in SpaceClaim, and a mesh consisting of 463,701 elements was generated using ANSYS Meshing. The improvement of the flow field in terms of separation on an airfoil NACA 0012 was investigated by using plasma at two velocities and angles of attack.

Play

Price: Free

Introduction to the Electrolysis models in ANSYS Fluent software Introduction to the "Fuel Cell and Electrolysis" model ("Electrolysis" sub-models) Introduction to the "Potential/Electrochemistry" model ("PEM Electrolysis" and "Alkaline Electrolysis" sub-models) Introduction to the construction of the electrolyzer and its components Introduction to the electrochemistry concepts and electrochemical reactions Introduction to the governing equations of the electrolysis process

Play

Price: $569

The problem numerically simulates the Electrolysis Stack using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh is Structured, and the element number equals 279,868. We used the Fuel Cell and Electrolysis model and Electrolysis sub-model to define the electrolysis process. We used the Species model to define H2, O2, and H2O.

Play

AI Assistant

Ask me anything about MR CFD

How can I help?

Ask away, I'll point you the right way.

What I can do on this page

AI can make mistakes. Check important answers.