Hydraulic Structure & Civil Online Courses
Here's every CFD online course related to Hydraulic Structure & Civil category.
Turbine Hydropower in Waterline Optimization, Paper Numerical Validation by ANSYS Fluent
Intermediate, Advanced
Price: $240
In this project, we intend to simulate the lift-based in-pipe water turbine using the mesh motion method to compare and validate the results with the results in the article.
Price: $28
The problem simulates a two-phase flow (water and air) inside an open channel with a 180-degree arc using ANSYS Fluent software.
Price: $36
The problem numerically simulates the hydrodynamics of the Kaplan turbine using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 9861922. We use the Frame Motion to define rotational movement around the Kaplan turbine.
Price: $120
The problem numerically simulates the Sedimentation in Urban Sewer Conduits using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 14280. We use the dense discrete phase model (DDPM)to define water and sand particles.
Price: $240
The problem numerically simulates the effect of an earthquake on a dam using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 812943. We perform this simulation as unsteady (Transient). We use the VOF Multi-Phase model to define water and air. We use the Frame Motion to define a movement in this model with a UDF.
Price: $27
The present problem simulates a two-phase flow within a compound channel using ANSYS Fluent software. This simulation is based on the information from a reference article, "Application of the Shiono and Knight Method in compound channels with non-prismatic floodplains," and its results are compared and validated with the results in the article.
Water Infiltration into a Porous Concrete Block, ANSYS Fluent Simulation Training
Beginner, Intermediate
Price: $24
The problem numerically simulates Water infiltration into a porous concrete block using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number about 1million. We perform this simulation as unsteady (Transient). We use the Porous medium to study water infiltration into a porous concrete block. We use the VOF Multi-Phase model to define two-phase flow inside a concrete block.
Cavitation Flow Through an Axial Inducer Simulation
Intermediate
Price: $80
The problem numerically simulates Cavitation Flow Through an Axial Inducer using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 938174. We use the Frame Motion method to define the rotational movement in cell zone conditions. We use the VOF Multi-Phase model to define the two-phase flow, including liquid and vapor.
Price: $240
The problem numerically simulates the Rotation of a Cube Considering Sloshing using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 168367. We perform this simulation as unsteady (Transient). We use the VOF Multiphase model to define water and air. We use a UDF to define the variable angular velocity of the cube's rotation.