Hydraulic Structure & Civil Online Courses

Price: $30

The study conducts a CFD analysis of sand particle sedimentation using ANSYS Fluent software. We design the cylindrical geometry using ANSYS Design Modeler. We mesh the model using ANSYS Meshing software, resulting in 388,797 hexahedral elements. We use the Eulerian multiphase model to simulate three different sizes of sand particles (small, medium, and large) interacting with the fluid phase. We aim to predict the sedimentation patterns and particle distribution for different sand sizes, analyzing density, pressure, and volume fraction contours.

Price: $14

This study investigates the effects of energy dissipation blocks on the energy dissipation efficiency of stepped spillways using computational fluid dynamics (CFD) simulations. Two spillway configurations, with and without blocks, were analyzed under different flow conditions. The results showed that the presence of blocks enhanced energy dissipation by 6% compared to the conventional stepped spillway design. These findings contribute to the optimization of stepped spillway designs for improved energy dissipation and downstream channel protection.

Price: $8

This project investigates the steel valve Thermal and Hydraulic performance through CFD analysis in ANSYS Fluent. The study focuses on the cooling of hot water (400K) flowing through the valve while exposed to external air convection (300K). The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a mesh of 2,237,861 elements. The simulation uses a pressure-based solver with the RNG k-ε turbulence model and enabled energy equation for steady-state conditions. The study demonstrates the impact of valve geometry on flow patterns, pressure distribution, and temperature gradients, providing insights into heat transfer and cooling efficiency.

Price: $10

⦁ This problem simulates Hydraulic Jump Investigation in Stepped Structures, using Ansys Fluent software. ⦁ The 2-D geometry is designed in Design Modeler software. ⦁ ANSYS Meshing software is used to generate the mesh; the element number equals 76,048. ⦁ In this project, the Formation of hydraulic jump is simulated using the VoF model. ⦁ Flow energy loss in this project is well modeled.

Price: $320

The current CFD Analysis Validates the Paper ‘Field-Scale Numerical Investigation of Proppant Transport among Multicluster Hydraulic Fractures’ via ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and generated the mesh on this geometry using ANSYS Meshing software. The mesh type is structured. The Eulerian multiphase model is used to simulate the proppant. The Dense Discrete phase model (DDPM) is used in the simulation. The Saffman lift force, virtual mass force, and two-way turbulence coupling models are taken into account.

Price: $60

The present problem simulates the aeroacoustics and sound generation by a water flow inside a Francis Turbine using ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is unstructured with 4,914,404cells. We use the Frame Motion (MRF) to define rotation movement. The Broadband Noise Sources model is also used to define the acoustic model

Price: $20

The problem numerically simulates Hydro-Kinetic turbine using ANSYS Fluent software. We design the 3-D model with the Solidworks software. We mesh the model with ANSYS Meshing software, and the element number equals 7,758,370. The Mesh Motion (Sliding Mesh) technique is used to simulate the rotation of the turbine blades The VOF method is used In this simulation.

Price: $160

The current CFD Analysis models the Bulb Turbine via ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and generated the mesh on this geometry using ANSYS Meshing software. The Frame Motion technique is utilized to model the rotation of the turbine. The Discrete Phase Model (DPM) account for the presence of sand particles. The Erosion on the turbine, due to particle collision is investigated.

Price: $24

The present problem simulates the water flow inside a Turgo water turbine by ANSYS Fluent software. The geometry is designed using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number is 4,344,106. Mesh Motion (Sliding Mesh) is used to define the rotation of the blades inside the chamber.