Mechanical Online Courses
Here's every CFD online course related to Mechanical category.
Water Discharge of a Rotating Tank, Ansys Fluent CFD Simulation Training
Beginner, Intermediate
Price: $24
In this project, the water discharging of a rotating tank has been simulated, and the results have been investigated.
Price: $100
The problem numerically simulates the Effect of Contact Angle on Droplet Collapse using ANSYS Fluent software. We design the 3-D model by the SpaceClaim software. We Mesh the model by ANSYS Meshing software, and the element number equals 53440. We perform this simulation as unsteady (Transient). We use the VOF Multi-Phase model to water droplets in the air.
Colliding of Two Water Jets CFD Simulation
Beginner, Intermediate
Price: $80
In this project, colliding of two water jets has been simulated and the results have been investigated.
Price: $80
The problem numerically simulates the Firehose using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 147351. We perform this simulation as unsteady (Transient). We use the Eulerian Multi-Phases to define the two-phases flow, including water and air.
Price: $100
In this project, the water droplet collapse on the wall with/without shear stress has been simulated and the results of this simulation have been investigated.
Jet Impact on Resident Water CFD Simulation, Ansys Fluent Training
Beginner, Intermediate
Price: $80
In this project, jet impact on resident water has been simulated and the results of this simulation have been investigated.
Siphon CFD Simulation, Ansys Fluent Training
Beginner, Intermediate
Price: $80
The problem numerically simulates the Siphon Phenomenon using ANSYS Fluent software. We design the 2-D model by the SpaceClaim software. We Mesh the model by ANSYS Meshing software, and the element number equals 95451. We perform this simulation as unsteady (Transient). We use the VOF Multi-Phase Model to define two-phase flow in the siphon.
HVAC Modes Comparison on Corona Virus Particles
Intermediate
Price: $180
In this project, three different HVAC models were analyzed to investigate the effect of different types of ventilation inside a room, in which a corona patient breathes, on the breathing particles coming out from the patient's mouth, and how they spread inside this room.
Twin Screw Pump, ANSYS Fluent CFD Simulation Training
Intermediate, Advanced
Price: $16
The problem numerically simulates the Twin Screw Pump using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1184161. We perform this simulation as unsteady (Transient). We use the Mesh Motion method to define rotational motion around pump screws.