Mechanical Online Courses
Here's every CFD online course related to Mechanical category.
Serrated Vs. Plain Airfoil: Darrieus VAWT
Beginner, Intermediate, Advanced
Price: $72
This project uses ANSYS Fluent to numerically simulate and compare a serrated-airfoil and a plain-airfoil turbine. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of 1,186,185. The simulation is run as unsteady (transient). The rotating motion of the turbine blades is defined using the Mesh Motion option.
Price: $160
The problem numerically simulates the Wind Farm with Series Arrangement using ANSYS Fluent software. We design the 3-D model by the SpaceClaim software. We Mesh the model by ANSYS Meshing software, and the element number equals 7588964. We use the Frame Motion model to define the rotational movement.
Turbine Hydropower in Waterline Optimization, Paper Numerical Validation by ANSYS Fluent
Intermediate, Advanced
Price: $240
In this project, we intend to simulate the lift-based in-pipe water turbine using the mesh motion method to compare and validate the results with the results in the article.
Side Supply Air Conditioning, Paper CFD Validation
Beginner, Intermediate
Price: $160
The problem numerically simulates Air Conditioning (Side Supply) using ANSYS Fluent software. This project is validated with a reference article. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 1027974. The Energy Equation is activated, and heat flux is applied to the walls as heat sources.
Aorta, Non-Newtonian pulsating blood flow
Intermediate
Price: $42
The problem numerically simulates a non-Newtonian pulsating blood flow in Aorta using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ICEM software, and the element number equals 457864. We perform this simulation as unsteady (Transient). We use a UDF to define the pulsating inlet velocity to Aorta. We use the Carreau model to define a non-Newtonian fluid.
Accumulation of Particles in Elbow Bend by DDPM
Intermediate, Advanced
Price: $210
The problem numerically simulates a simple elbow bend using ANSYS Fluent software. We design the 3-D model with CAD software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 150624. This project is performed in an unsteady state (transient). We use the DDPM (Dense-Discrete-Phase-Method) in this project.
Price: $30
In this study, using the DPM (Discrete phase material) method, the effect of impurities in the working fluid on the splitter erosion was investigated.
Price: $21
The present problem simulates the movement of a submarine robot inside a canal containing water flow using ANSYS Fluent software.
Helical Blade Wind Turbine: 5 different RPMs
Beginner, Intermediate, Advanced
Price: $220
This project uses ANSYS Fluent to numerically simulate a helical-blade vertical axis wind turbine. The project investigates the tip speed ratio (TSR) across different blade rotational speeds. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with a polyhedral element count of 507,457. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational motion in a distinct zone around the blades.