Moving Reference Frame (MRF) Online Courses

Price: $12

The problem numerically simulates a Rotary Heat Exchanger, Effect of Mass Flow Rate on heat transfer coefficient in ANSYS Fluent software. The 2D geometry of the model is created in Design Modeler software. The model is meshed in ANSYS Meshing creating 86,598 elements. The Standard k-epsilon model is used to describe turbulency of the flow.

Price: $60

The present problem simulates the aeroacoustics and sound generation by a water flow inside a Francis Turbine using ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is unstructured with 4,914,404cells. We use the Frame Motion (MRF) to define rotation movement. The Broadband Noise Sources model is also used to define the acoustic model

Price: $160

The current CFD Analysis models the Bulb Turbine via ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and generated the mesh on this geometry using ANSYS Meshing software. The Frame Motion technique is utilized to model the rotation of the turbine. The Discrete Phase Model (DPM) account for the presence of sand particles. The Erosion on the turbine, due to particle collision is investigated.

Price: $160

The problem numerically simulates Slurry Flow in Centrifugal Pump using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the polyhedra element number equals 1,498,132. We use the Frame Motion to define the rotational movement in the rotating zone. The DPM multiphase is activated to model the effect of solid particles on erosion. The activated erosion models are Generic, Finnie, McLaury, Oka, and DNV.

Price: $16

The problem numerically simulates Slurry Flow in Centrifugal Pump using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the polyhedra element number equals 1,498,132. We use the Frame Motion to define the rotational movement in the rotating zone. The Mixture multiphase model is activated to model the effect of solid particles.

Price: $100

The problem numerically simulates the rotation of Boat Propeller using ANSYS CFX software. The geometry is designed in a 3D model with the SpaceClaim software. We performed the mesh of the model with ANSYS Meshing software, and the element number equals 4,037,941. Frozen Rotor is set for frame change model of the interfaces.

Price: $42

In this project, a flow around a Contra-Rotating Turbine has been simulated, and the results of this simulation have been investigated. This ANSYS Fluent CFD training simulates a contra-rotating VAWT turbine with two blade rows rotating oppositely at 14.7 rad/s. Inlet velocity is 5.3 m/s; mesh motion defines rotations using k-epsilon model and steady pressure-based solver. Results show enhanced pressure/velocity between blades, doubling torque (~1.9 N.m per row) for better power.

Price: $54

The problem numerically simulates the Fluid-Structure Interaction over HAWT Turbine using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. Mesh grid is generated using ANSYS Meshing , and the element number equals 3,465,821. The MRF method is used to rotate the turbine. FSI model analyses total strain, and stress over the turbine.

Price: $48

The problem numerically simulates a Multi-Stage Axial Compressor using ANSYS Fluent software. We design the 3-D model with the ANSYS Blade Gen. The meshing of the present model has been generated by TurboGrid software and the total cell number is 11,430 elements. The compressor motion has been modeled with the MRF method. The Turbo Workflow module was used to model the Compressor.