Paper Validation Online Courses

Price: $36

This project presents a CFD study based on the article “Analysis of Computational Fluid Dynamics and Particle Image Velocimetry Models of Distal-End Side-to-Side and End-to-Side Anastomoses for Coronary Artery Bypass Grafting in a Pulsatile Flow.” The objective is to reproduce and validate the hemodynamic behavior of distal-end side-to-side (deSTS) and end-to-side (ETS) anastomoses. All simulations were carried out in ANSYS Fluent using steady, laminar, and incompressible flow assumptions. The results include comparisons of velocity profiles and wall shear stress (WSS) to ensure accuracy with the reference study.

Price: $180

The current CFD Analysis numerically validates the paper “Numerical and experimental investigation of bionic airfoils with leading-edge tubercles at a low-Re in considering stall delay” via ANSYS Fluent software. The geometry of a NACA 4415 baseline airfoil with leading-edge tubercles is designed in SpaceClaim and meshed in ANSYS Meshing, generating 7,291,791 elements which were later converted to polyhedrons for improved accuracy and reduced cost. The turbulence of the flow is modeled using the Realizable k-epsilon turbulence model, with steady-state simulations performed at angles of attack of 18°, 22°, and 26°.

Price: $210

The current CFD analysis numerically validates the paper “Comparison of velocity and turbulence profiles downstream of perforated plate flow conditioners” by Spearman et al. using ANSYS Fluent software. The model designed and meshed the pipe geometry with perforated plate flow conditioner in SpaceClaim and ANSYS Meshing, generating 583,842 tetrahedral cells. A pressure-based solver with k-ε standard turbulence modeling and gravity effects (-9.81 m/s²) is employed, using water as the working fluid with velocity inlet profile and pressure outlet boundary conditions coupled via SIMPLE algorithm.

Price: $420

Co-firing Biomass with Coal Gasification. This project involves the simulation of coal and biomass co-firing in a furnace using CFD techniques. The primary objectives are to examine the combustion characteristics and validate the simulation results against the study by Ghenai and Janajreh. The furnace is defined with specific boundary conditions, and simulations are performed using an unsteady, incompressible flow model. The turbulent flow within the furnace is modeled using the k-e RNG turbulent model, thermal radiation is simulated with the P1 model, and combustion is analyzed with a PDF model. The simulation incorporates the kinetics/diffusion-limited rate model for particle combustion and the two competing rates Kobayashi model for devolatilization. Results are compared in terms of temperature contours and particle trajectories, confirming the simulation’s accuracy with a maximum error of approximately 5% in particle temperature ranges.

Price: $210

The current CFD analysis numerically validates the paper “Modeling particle distribution and deposition in indoor environments with a new drift–flux model” using ANSYS Fluent software. We designed and meshed the room geometry in Design Modeler and ANSYS Meshing, generating 128,000 cells. A pressure-based solver with k-ε RNG turbulence modeling is employed, and particle dynamics are simulated using the DPM model.

Price: $27

The problem numerically simulates Microencapsulated PCMs in ANSYS Fluent software. The 3D geometry of the model is created in Space Claim software. The model is meshed in ANSYS Meshing creating 4,045,254 elements. We simulate the problem Transient via pressure-based solver.

Price: $669

This product numerically simulates the Lithium-Ion Battery with PCM using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. We use the Battery Model to define a battery discharge. We use the Multi-Scale Multi-Domain (MSMD) solution method and NTGK electrochemistry model. We used the Solidification and Melting Model to define phase change material (PCM). The present CFD work is Validated with a reference Article.

Price: $949

This project numerically simulates the PEM Fuel Cell using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software and the Structured mesh including 270,0000 elements is generated. We use the Fuel Cell and Electrolysis Model to define a fuel cell system. We used the PEMFC sub-model to define a proton-exchange membrane fuel cell. We used the Species model to define H2, O2, and H2O. The present CFD work is Validated with a reference Article.

Price: $36

In this project, a V-Flame is simulated using the Zimont model, then compared with the paper "Numerical simulation of a premixed turbulent V-shaped flame." by Ansys Fluent software. Premixed combustion of methane-air is ​​simulated, comparing the Zimont and Eddy Break-Up models. The geometry is designed in Spaceclaim software. A structured grid is used to create a mesh in the computing domain using ANSYS Meshing software.